Maytag MFD2561HE Use and Care Guide - Page 8

Installation Removing Front-Mounted Handles for Stainless Steel Doors 1. Remove plastic button plug at base of handle with a very small fiat-blade screwd river. Insert phillips screwdriver into predrilled hole to remove screw. 2. Slide handle down and remove from door clip. 3. Repeat above steps to remove other handle. Removing Front-Mounted Handles for Stainless Steel Freezer Door 1. Remove right side plastic button __ with a very small flat-blade spcluregws draivt eer.ach end of handle _,,_,,, • Insert phillips screwdriver _'_/ into predrilled hole to remove screw. 2. Slide handle dght and remove from door clip. \ Installing Front-Mounted Handles for Stainless Steel Freezer Door ]. Loosen lower door clip on door with a phillips screwdriver Connecting the Water Supply 2. Locate predrilled hole at base of handle, and fit hollow end of handle over left door clip. \ 3. Fit other end of handle over left door clip and slide left as far as possible. NOTE: If end of handle does \ not fit over left clip, loosen dght clip further until fit can be accomplished. 4. Insert phillips screwdriver into preddlled hole at end of handle to tighten screw. Insert plastic button plug into hole.