Maytag MFX2570AEM Use & Care Guide - Page 13
The Water Dispenser, To Dispense Water Standard, To Dispense Water Measured Fill - manual
View all Maytag MFX2570AEM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
NOTE: You may press ICE TYPE, under Back, at any time to exit calibration mode. The Calibrate Measured Fill icon will disappear. 3. Press and release the water dispenser paddle, as needed, to dispense water to the 1 cup fill line. NOTE: If overfilling or spilling occurs, discard the water and press ICE TYPE to restart the calibration process. The Water Dispenser IMPORTANT: Dispense at least 1 qt (1 L) of water every week to maintain a fresh supply. To Dispense Water (Standard): 1. Press a sturdy glass against the water dispenser lever. NOTE: While dispensing water and for 3 seconds after dispensing has stopped, the digital display will show how much water has been dispensed. 2. Remove the glass to stop dispensing. To Dispense Water (Measured Fill): Measured Fill allows you to dispense a specified amount of water with the touch of a few buttons. NOTE: The amount of water you select will be dispensed. Be sure that the container is empty and can hold the entire volume. If ice is in the container, you may need to adjust your selection. 1. Press MEASURED FILL to turn the feature on. When the feature is on, the Measured Fill screen appears on the display. 4. When 1 cup of water has been correctly dispensed into the measuring cup, press the MEASURED FILL button under the word "Confirm" to confirm the calibration. A A. 1 cup of water 5. When Measured Fill calibration has been confirmed the icons will disappear and the display will return to the home screen. Press ICE TYPE to manually turn off the Measured Fill feature. NOTE: The dispenser will automatically turn off Measured Fill after 1 minute of inactivity. When Measured Fill is turned off, any changes you have made will be lost and all defaults will be restored. 2. You can dispense water by the ounce, cup, or liter. The default unit is ounces. To switch to cups or liters, press the LIGHT button. Default, minimum, and maximum volumes are listed below. Units Ounces Cups Liters Default 8 1 0.25 Minimum 1 ¹/₄ 0.05 Maximum 128 16 4.00 3. Press the LOCK and OPTIONS buttons to adjust the volume as desired. The LOCK button increases the volume, and the OPTIONS button lowers the volume. NOTE: Most coffee cups (commonly 4 to 6 oz [118 to 177 mL] per cup) are not the same size as a measuring cup (8 oz [237 mL]). You may need to adjust the volume to avoid unintentionally overfilling coffee cups. 4. To dispense water, press a sturdy glass against the water dispenser lever OR place the glass below the water dispenser and press the MEASURED FILL button. NOTE: While dispensing water, the digital display will count down how much water remains to be dispensed, according to the volume you selected. The flow of water will automatically stop once the desired volume has been dispensed. 13