Maytag MGD6000XG Owners Manual - Page 11
Changing the Sensor Cycle settings
View all Maytag MGD6000XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
5. Adjust cycle settings, if desired 7. Press and hold START/PAUSE to begin cycle + - temp level dryness level damp signal 11-cycle model shown You may adjust different settings, depending on whether you have selected a Sensor Cycle, Timed Cycle, or Steam Cycle. See the Cycle Guide for detailed information. NOTE: Not all options and settings are available with all cycles. Not all cycles are on all models. Sensor Cycles: You can select a different dryness level, depending on your load, by pressing the button for More, Normal, or Less. Selecting More, Normal, or Less automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle. Sensor cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting. Timed Cycles: When you select a Timed Cycle, the default time appears in the display. Use the + and buttons to increase or decrease the time in 1 minute increments. Press and hold to change the time in 5 minute increments. The default temperature may be changed by pressing the Temp Level button until the desired dry temperature is lit. + - temp level dryness leve Custom Refresh with Steam: The cycle time defaults to 15 minutes, for 1-4 items. For larger loads, you may add additional time up to 50 minutes, in 5 minute increments, using the Timed Dry Adjust + and buttons. 6. Select any additional options 11-cycle model shown Add additional options such as Reduce Static, Wrinkle Prevent/ Wrinkle Prevent with Steam and/or Steam Boost by pressing the button for that option. NOTE: Not all options and settings are available with all cycles. Press and hold the START/PAUSE button to begin the cycle. 8. Remove garments promptly after cycle is finished + - temp level dryness level damp signal 11-cycle model shown Promptly remove garments after cycle wrinkle prevent without steam has completed to reduce wrinkling. If you will be unable to remove the load promptly, select the Wrinkle Prevent/Wrinkle Prevent with Steam option before pressing START/PAUSE. Changing the Sensor Cycle settings to increase drying time If all your loads on all Sensor Cycles are consistently not as dry as you would like, you may change the default settings to increase the default dryness level. Your sensor drying settings can be adjusted to adapt to different installations, environmental conditions or personal preference. This change is retained and will affect all of your sensor cycles, not just the current cycle/load. There are 3 drying settings, which are displayed using the time display: 01 Factory preset dryness level. 02 Slightly drier clothes, 15% more drying time. 03 Much drier clothes, 30% more drying time. To change the drying settings: NOTE: The settings cannot be changed while the dryer is running or paused. The dryer must be in standby mode (the power button is off) to adjust the default settings. 1. Before starting a cycle, press and hold the Temp Level button for 6 seconds. 2. Press the Dryness Level button to select the dryness level shown in the time display: 01, 02, or 03. 3. Press START/PAUSE to save the new dryness level setting. 11