Maytag MGD6600TQ Use and Care Guide - Page 15

Reverse the strike, Reinstall the door

Get Maytag MGD6600TQ - MaytagR BravosR Steam Gas Dryer PDF manuals and user guides View all Maytag MGD6600TQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Reverse the strike 1. Remove the door strike from the dryer door opening. 2. Remove the cosmetic screw opposite the door strike. A B 3. Remove the 4 screws from the opposite side of the door. A. Door strike B. Cosmetic screw 3. Reinstall the door strike and cosmetic screw on the opposite side of the dryer door opening from where they were removed. NOTE: Door strike and plugs must be on the same side of the dryer door opening. Reinstall the door 1. Remove the 4 screws and 2 hinges from the dryer door. 2. Replace the 4 screws in the same holes. 4. Install the 2 hinges to the front panel of the dryer using 4 screws. Use the non-slotted side to attach the hinge to the front panel. 5. Install screws in the top hinge holes in the door. Do not tighten screws. Leave approximately ¼" (5 mm) of screw exposed. A A A. Install these screws first. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
15
Reverse the strike
1.
Remove the door strike from the dryer door opening.
2.
Remove the cosmetic screw opposite the door strike.
3.
Reinstall the door strike and cosmetic screw on the opposite side of the dryer door
opening from where they were removed.
NOTE:
Door strike and plugs must be on the same side of the dryer door opening.
Reinstall the door
1.
Remove the 4 screws and 2 hinges from the dryer door.
2.
Replace the 4 screws in the same holes.
3.
Remove the 4 screws from the opposite side of the door.
4.
Install the 2 hinges to the front panel of the dryer using 4 screws. Use the non-slotted side
to attach the hinge to the front panel.
5.
Install screws in the top hinge holes in the door. Do not tighten screws. Leave
approximately ΒΌ" (5 mm) of screw exposed.
A. Door strike
B. Cosmetic screw
A
B
A. Install these screws first.
A
A