Maytag MGDE300VF Installation Instructions - Page 7

Recommended installation spacing for cabinet installation NOTE: Some models are not recommended for cabinet installation. • For cabinet installation, with a door, minimum ventilation openings in the top of the cabinet are required. B_ Recommended installation spacing for recessed or closet installation, with stacked washer and dryer The dimensionsshown are for the recommended spacing. 48 in, 2 * (310 cm2) + t_ 3"* (76 mm) BB ©o II D** E F* G H I Steam (Electric or Gas) Non-Steam (Electric or Gas) A* 7" (178 mm) 7" (178 mm) B* 7" (178 mm) 7" (178 mm) C* 9" (229 mm) 9" (229 mm) D** 5" (127 mm) 5" (127 mm) E 32 9/16"(827mm) 31 1/2" (800 mm) F* 1" (25 mm) 1" (25 mm) G 1" (25 mm) 1" (25 mm) H 27" (686 mm) 27" (686 mm) I 1" (25 mm) 1" (25 mm) *Required spacing **For side or bottom venting, 0" (0 mm) spacing is allowed. o 24 in,2 * (155 cm2) 3"* (76 mm) + 6"* (_52 mm) 1" _ (25 mm) ,_- 27"-_ (686 mm) 1 '1 (25mm) Steam (Electric or Gas) Non-steam (Electric or Gas) A* 5 1/2"(140 mm) 5" (127 mm) *Required spacing NOTE: Some models are not recommended for stacked recessed or closet installation. Mobile home - Additional installation requirements This dryer is suitable for mobile home installations. The installation must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280) or Standard CAN/CSA-Z240 MH. Mobile home installations require: All Dryers • Metal exhaust system hardware, which is available for purchase from your dealer. Special provisions must be made in mobile homes to introduce outside air into the dryer. The opening (such as a nearby window) should be at least twice as large as the dryer exhaust opening. For gas dryers • Mobile Home Installation Kit Part Number 346764. See "Tools and Parts" section for information on ordering.