Maytag MGDX655DW Installation Guide - Page 14
Reverse Door Swing Optional
View all Maytag MGDX655DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Reverse Door Swing (Optional) If your door is the 29" Super Wide Side-Swing Door, go to steps 1-13 beginning on this page. 2. Remove bottom screws If your door is the 27" Wide Side-Swing Door, go to steps 1-11 beginning on page 16. If your door is the 27" Wide Side-Swing Door with Glass, go to steps 1-13 beginning on page 19. Open dryer door. Remove bottom screws from dryer cabinet side of hinges. Loosen (do not remove) top screws from dryer cabinet side of hinges. 3. Lift door off top screws NOTE: Magnetized screwdriver is helpful. 29" Super Wide Side-Swing Door 1. Place towel on dryer Lift door until top screws in dryer cabinet are in large part of hinge slot. Pull door forward off screws. Set door (handle side up) on top of dryer. Remove top screws from dryer cabinet. 4. Remove screws from hinges Place towel on top of dryer to avoid damaging the surface. Remove screws attaching hinges to door. 14