Maytag MGDZ600TE Use and Care Manual - Page 16

Maytag MGDZ600TE - Epic Z Front Load Gas Dryer Manual

Get Maytag MGDZ600TE - Epic Z Front Load Gas Dryer PDF manuals and user guides
UPC - 883049141169
View all Maytag MGDZ600TE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

5. Rotate outer door 180°. 180˚ 2. Remove the 4 screws that attach to the inner door hinge and move the hinge to the other side. Reinstall the 4 screws. Reverse hinge 1. Use a small flat-blade screwdriver to remove 2 plug strips from the inner door. Slide the head of the screwdriver under the plugs, being certain not to scratch the inner door surface. Lift up. A A. Door hinge 3. Reinstall plug strips on opposite side of the inner door. 4. Check for fingerprints on the glass. Clean glass if necessary. 5. Place the inner door assembly inside the outer door assembly. To fit correctly, the inner door assembly edge fits completely inside the outer door assembly edge. 6. Reassemble the inner and outer door assemblies with the 6 screws. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
16
5.
Rotate outer door 180°.
Reverse hinge
1.
Use a small flat-blade screwdriver to remove 2 plug strips from the inner door. Slide the
head of the screwdriver under the plugs, being certain not to scratch the inner door
surface. Lift up.
2.
Remove the 4 screws that attach to the inner door hinge and move the hinge to the other
side. Reinstall the 4 screws.
3.
Reinstall plug strips on opposite side of the inner door.
4.
Check for fingerprints on the glass. Clean glass if necessary.
5.
Place the inner door assembly inside the outer door assembly. To fit correctly, the inner
door assembly edge fits completely inside the outer door assembly edge.
6.
Reassemble the inner and outer door assemblies with the 6 screws.
180˚
A. Door hinge
A