Maytag MGR4451BDW Use and Care Manual - Page 9
Leveling Legs, Oven Light, Storage Drawer, Oven Bottom, Removal of Gas Appliance, Electrical - oven model
View all Maytag MGR4451BDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Leveling Legs CAUTION Be sure the anti-tip bracket secures one of the rear leveling legs to the floor. This bracket prevents the range from accidentally tipping. Be sure the range should be leveled when installed. If the range is not level, turn the leveling legs (located at each corner of the range) until range is level. Oven Light AANNTI-TTIIP-TBIRPACBKRETACKET LLEEVEVLEINLGILNEGG LEG CAUTION • Disconnect power to range before replacing light bulb. • Use a dry potholder to prevent possible harm to hands when replacing bulb. • Be sure bulb is cool before touching bulb. • Do not touch hot bulb with a damp cloth as this may cause the bulb to break. To Replace Oven Light Bulb: 1. When oven is cool, hold bulb cover in place, then slide wire retainer off cover. Important Bulb cover will fall if not held in place while removing wire retainer. BULB COVER 2. Remove bulb cover and light bulb. 3. Replace with a 40-watt appliance bulb. 4. Replace bulb cover and secure with wire retainer. WIRE RETAINER 5. Reconnect power to range. Reset clock. Electrical Connection Appliances which require electrical power are equipped with a threeprong grounding plug which must be plugged directly into a properly grounded three-hole 120 volt electrical outlet. Always disconnect power to appliance before servicing. The three-prong grounding plug offers protection against shock hazards. DO NOT CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD PLUG. If an ungrounded, two-hole or other type electrical outlet is encountered, it is the personal responsibility of the appliance owner to have the outlet replaced with a properly grounded three-hole electrical outlet. Removal of Gas Appliance Gas appliance connectors used to connect this appliance to the gas supply are not designed for continuous movement. Once installed, DO NOT repeatedly move this gas appliance for cleaning or to relocate. If this appliance has to be moved and/or removed for servicing, follow the procedure described in the installation instructions. For information, contact Maytag Customer Assistance at 1-800-688-9900 USA or 1-800-688-2002 Canada. To prevent range from accidentally tipping, range must be secured to the floor by sliding rear leveling leg into the antitip bracket. Storage Drawer (select models) CAUTION Do not store plastic, paper products, food or flammable materials in this drawer. The drawer may become too warm for these items when the oven is in use. The storage drawer can be removed to allow you to clean under the range. To remove: 1. Empty drawer and pull out to the first stop position. 2. Lift up the front of the drawer. 3. Pull out to the second stop position. 4. Grasp sides and lift drawer up and out. To replace: 1. Fit the ends of the drawer glides into the rails in the range. 2. Lift up the front of the drawer and gently push in to the first stop position. 3. Lift drawer up again and push until drawer is closed. Oven Bottom Protect oven bottom against spillovers, especially acidic or sugary spills, as they may discolor the porcelain enamel. Use the correct pan size to avoid spillovers and boilovers. 8