Maytag MGR6775BD Use and Care Manual - Page 10

Oven Cooking 2. Press the More+ or Less- pad to change the setting between °F and °C. 3. Wait four seconds and the new setting will be accepted. 4. If the More+ or Less- pad is not pressed within 30 seconds, the control will return to the existing settings. Return To Factory Default Settings The control can be reset to the factory default settings. To return to the default settings: 1. Press and hold upper oven Keep Warm and CANCEL pads for three seconds. A single beep will sound and "dEF" (default) will appear in the display. 2. Press the More+ pad to choose the factory settings. "cLr" (clear) will appear in the display. 3. Wait four seconds and the factory settings will be accepted. 4. If the More+ or Less- pad is not pressed within 30 seconds, the control will return to the existing settings. Setting Upper and Lower Oven Functions Baking To set bake: 1. Press the Bake pad for desired oven. • "Bake" will flash. • "000°" will flash in the display. 2. Select the oven temperature. The oven temperature can be set from 170° to 550°. Press or press and hold the More+ or Less- pad. • "350°" will light when either pad is first pressed. • Press the More+ pad to increase the temperature. • Press the Less- pad to decrease the temperature. 3. Press Bake pad again or wait four seconds. • "Bake" will stop flashing and light in the display. • "Preheat" will light in the display. • 100° or the actual oven temperature will display. The temperature will rise in 5° increments until the preset temperature is reached. 4. Allow selected oven to preheat for 8-15 minutes. • When the set oven temperature is reached, one long beep will sound. • To recall the set temperature during preheat, press the Bake pad. To change the oven temperature during preheat, press Bake once and reset temperature. 5. Place food in the oven. 6. Check cooking progress at minumum cooking time. Cook longer if needed. 7. When cooking is finished, press CANCEL pad. 8. Remove food from the oven. Baking Differences Between Your Old and New Oven It is normal to notice some baking time differences between a new oven and an old one. See Adjusting the Oven Temperature on page 11. Notes: • Allow at least 1/2-inch between the baking pan or casserole and the top element in the upper oven. Loaf, angel food or bundt pans are not recommended in the upper oven. • Do not use temperatures below 140° F to keep food warm or below 200° F for cooking. For food safety reasons, lower temperatures are not recommended. • To change the oven temperature during cooking, press the Bake pad and then the More+ or Less- pad until you reach the desired temperature. • When preheating with a baking/pizza stone inside the upper oven, do not set oven above 400° F. To use baking/pizza stones at temperatures above 400° in the upper oven, put stone in after the preheat beep. • If you forget to turn off the oven, it will automatically turn off at the end of 12 hours. If you wish to deactivate the Automatic Shut-off/Sabbath Mode feature, see page 13. Cook & Hold Cook & Hold allows you to bake for a preset amount of time, followed by a one-hour Keep Warm cycle. To set Cook & Hold: 1. Press the Cook & Hold pad once for upper oven or twice for lower oven. Cont. 9