Maytag MGR6875ADB Use and Care Guide - Page 11

Oven Cooking Return To Factory Default Settings The control can be reset to the factory default settings. To return to the default settings: 1. Press and hold upper oven Keep Warm and CANCEL pads for 3 seconds. A single beep will sound and 12:00 will appear in the display. 2. Reset the clock to the current time of day. Setting Oven Functions Auto Set Pad Use with function pads to automatically set: • 350° F bake temperature • HI or LO broil • three hours of cleaning time • 170° F keep warm temperature Baking To set Bake: 1. Press the Bake pad for desired oven. • BAKE and 000 will flash in the display. 2. Select the oven temperature. Press the Autoset pad for 350° F or the appropriate number pads. • Each additional press of the Autoset pad will increase the temperature by 25°. • The oven temperature can be set from 170° to 550°. 3. Press Bake pad again or wait four seconds. • BAKE will stop flashing and light in the display. • PREHEAT will light in the display. • 100° or the actual oven temperature if over 100° F will display. It will rise in 5° increments until the preset temperature is reached. 5. Place food in the oven. 6. Check cooking progress at the minimum cooking time. Cook longer if needed. 7. When cooking is finished, press CANCEL pad. 8. Remove food from the oven. Baking Differences Between Your Old and New Oven It is normal to notice some baking time differences between a new oven and an old one. See "Adjusting the Oven Temperature" on page 15. Baking Notes: • Allow at least 1/2-inch between the baking pan or casserole and the top burner in the upper oven. Loaf, angel food or bundt pans are not recommended in the upper oven. • Do not use temperatures below 140° F to keep food warm or below 200° F for cooking. For food safety reasons, lower temperatures are not recommended. • When preheating with a baking/pizza stone inside the upper oven, do not set oven above 400° F. To use baking/ pizza stones at temperatures above 400° in the upper oven, put stone in after the preheat beep. • To change the oven temperature during cooking, press Bake pad, then press the Autoset pad or appropriate number pads until the desired temperature is displayed. • To change the oven temperature during preheat, press the Bake pad twice, then press the Autoset pad or appropriate number pads until the desired temperature is displayed. • If you forget to turn off the oven, it will automatically turn off at the end of 12 hours. If you wish to deactivate this feature, see page 15. Baking with Convection (lower oven only) 4. Allow the selected oven to preheat for 8-15 minutes. • When the set oven temperature is reached, one long beep will sound. When convection baking, enter your normal baking temperature. The control will automatically reduce the set oven temperature by 25° (even though normal baking temperature is displayed). The convect fan will start after the oven has been on for five minutes. To set Convect Bake: 1. Press the Convect Bake pad. • The set temperature will display. • LOWER BAKE and FAN will flash • PREHEAT will turn off. • 000 will flash in the display. • To recall set temperature during preheat, press Bake pad. 10