Maytag MGS5752BDB Owners Manual - Page 20
Maintenance
View all Maytag MGS5752BDB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Maintenance Oven Door Leveling Legs CAUTION • Do not place excessive weight on or stand on an open oven door. This could cause the range to tip over, break the door, or injure the user. • Do not attempt to open or close door or operate oven until door is properly replaced. • Never place fingers between hinge and front oven frame. Hinge arms are spring mounted. If accidentally hit, the hinge will slam shut against oven frame and could injure your fingers. CAUTION Be sure the anti-tip bracket secures one of the rear leveling legs to the floor. This bracket prevents the range from accidentally tipping. Be sure the range is leveled when installed. If the range is not level, turn the leveling legs, located at each corner of the range, until range is level. To remove: AANNTI-TTIIP-TBIRPACBKRETACKET 1. When cool, open the oven door to the first stop position (opened about four inches). LLEVEEVLIENLGILNEGG LEG Oven Light (style varies by model) 2. Grasp door at each side. Do not use the door handle to lift door. 3. Lift up evenly until door clears hinge arms. CAUTION • Disconnect power to range before replacing light bulb. • Allow oven to cool before replacing light bulb. To replace: • Make sure bulb cover and bulb are cool before touching. 1. Grasp door at each side. 2. Align slots in the door with the hinge arms on the range. 3. Slide the door down onto the hinge arms until the door is completely seated on the hinges. Push down on the top corners of the door to completely seat door on hinges. Door should not appear crooked. Note: The oven door on a new range may feel "spongy" when it is closed. This is normal and will decrease with use. To replace oven light bulb: 1. When oven is cool, hold bulb cover in place, then slide wire retainer off cover. Note: Bulb cover will fall if not held in place while removing wire retainer. 2. Remove bulb cover and light bulb. BULB COVER WIRE RETAINER 3. Replace with a 40-watt appliance bulb. Oven Window 4. Replace bulb cover and secure with wire retainer. 5. Reconnect power to range. Reset clock. To protect the oven door window: 1. Do not use abrasive cleaning agents such as steel wool scouring pads or powdered cleansers as they may scratch the glass. 2. Do not hit the glass with pots, pans, furniture, toys, or other objects. 3. Do not close the oven door until the oven racks are in place. OR 1. Use a dry potholder and very carefully unscrew bulb cover and bulb. 2. Replace with a 40 watt, oven-rated appliance bulb. Bulb with a brass base is recommended to prevent fusing of bulb into socket. 3. Replace bulb cover and reconnect power to range. 4. Reset clock. Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later date. 19