Maytag MHW4200BG Installation Guide - Page 2
Installation Requirements - washer
View all Maytag MHW4200BG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
INSTALLATION REQUIREMENTS TOOLS AND PARTS Gather required tools and parts before starting installation. Tools needed: Parts supplied: NOTE: All parts supplied for installation are in the washer basket. Adjustable or open end wrenches 1/2" (13 mm) and 9/16" (14 mm) 4" min (102 mm) Level Cable tie Transport bolt hole plugs (4) Wood block Ruler or measuring tape Pliers that open to 19⁄16" (39.5 mm) Optional tools: Flashlight Bucket Parts needed: (Not supplied with washer) Water inlet hoses (2) Flat inlet hose washers (4) Drain hose with clamp and form (may be shipped unassembled) Available Accessories: An optional matching pedestal is available for your washer. Please contact your retailer for ordering information, or see the "Assistance or Service" page on the back of your "Use and Care Guide". Alternate parts: (Not supplied with washer) Your installation may require additional parts. To order, please refer to toll-free numbers on the back page of your "Use and Care Guide". If you have: You will need: Overhead sewer Standard 20 gal. (76 L) 39" (990 mm) tall drain tub or utility sink, sump pump and connectors (available from local plumbing suppliers) 1" (25 mm) standpipe 2" (51 mm) diameter to 1" (25 mm) diameter Standpipe Adapter Part Number 3363920 Connector Kit Part Number 285835 Drain hose too short Extension Drain Hose Part Number 285863 Connector Kit Part Number 285835 Lint clogged drain Drain Protector Part Number 367031 Connector Kit Part Number 285835 Floor drain system Siphon Break Kit Part Number 285834 Connector Kit (x2) Part Number 285835 Extension Drain Hose Part Number 285863 2