Maytag MHW6630H Owners Manual - Page 44
If you experience, Possible Causes, Solution
View all Maytag MHW6630H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.maytag.com.tw. If you experience Possible Causes Error Code Appears in Display (for 2- and 3-digit displays) (cont.) Solution F# E# or F## E## code other than as described above appears in display System error code. Washer making error beeps Door has not been opened and closed for at least 3 cycles. Washer beeps when START is touched Door not closed. Clean Washer LED flashing The washer has run 30 wash cycles at end of wash cycle and is indicating a reminder to run (on some models) the Clean Washer with affresh cycle. Touch POWER once to clear the code. Then touch POWER again to restart washer. If code appears again, call for service. Unplug washer for 30 seconds, then plug back in. This code may occur when the washer is first turned on. Open and close the door to clear the display. Close the door completely. Run the Clean Washer with affresh cycle. If the Clean Washer with affresh cycle is not turned on, the LED will stop flashing at the end of a wash cycle after running 3 more regular wash cycles. After 30 more wash cycles are completed, the Clean Washer with affresh LED will again flash at the end of a wash cycle as a reminder. 44