Maytag MHW6630HW Owners Manual 1 - Page 38

Remove garments promptly, after cycle is finished, Touch and hold START to begin, wash cycle

Page 38 highlights

12. Touch and hold START to begin wash cycle 13. Remove garments promptly after cycle is finished Touch and hold START to start the wash cycle. To pause a cycle in progress, touch START once, then touch and hold again to continue the cycle. To cancel a cycle, touch POWER. Once you touch and hold START, you will hear the door lock, unlock, and lock again. The washer door will remain locked during the wash cycle. Unlocking the door to add garments: If you need to open the door to add 1 or 2 missed garments, you may do so while the "Add Garment" light is lit. The time allowed to add a garment will vary based on cycle selection and load size. Touch START once; the door will unlock once the washer movement has stopped. This may take several minutes. Then close the door and touch and hold START again to restart the cycle. Adding items after "Add Garment" light is off: Cancel current cycle. Water will drain and you will need to reselect cycle and restart. For wash performance and optimal energy savings, add garments only when the "Add Garment" light is on. Promptly remove garments after cycle has completed to avoid odor and rusting of metal objects on garments. When unloading garments, pull back the door seal and check for small items between the tub and the washer drum. If you will be unable to remove the load promptly, use the Fresh Hold/Fresh Spin option. If the Fresh Hold/Fresh Spin option is selected, the washer will automatically activate the fan and tumble the load periodically for up to 16 hours. To turn off the Fresh Hold/Fresh Spin option, touch POWER. To set the washer so that the Fresh Hold/Fresh Spin option does not come on for future cycles, touch FRESH HOLD. NOTES: ■ The door will remain locked while the Fresh Hold/Fresh Spin option is active. To cancel the option and unlock the door, touch POWER. ■ A small amount of water may remain in the dispensers after the wash cycle is complete. This is normal. ■ This washer has a tight seal to avoid water leaks. To avoid odors, leave the door open to allow the washer to dry between uses. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

38
13.
Remove garments promptly
after cycle is finished
Promptly remove garments after cycle
has completed to avoid odor and rusting of
metal objects on garments. When unloading
garments, pull back the door seal and check
for small items between the tub and the
washer drum.
If you will be unable to remove the load
promptly, use the Fresh Hold/Fresh Spin
option. If the Fresh Hold/Fresh Spin option
is selected, the washer will automatically
activate the fan and tumble the load
periodically for
up to 16
hours. To turn off the Fresh Hold/Fresh
Spin option, touch POWER. To set the washer so that the
Fresh Hold/Fresh Spin option does not come on for future
cycles, touch FRESH HOLD.
NOTES:
The door will remain locked while the Fresh Hold/Fresh Spin
option is active. To cancel the option and unlock the door,
touch POWER.
A small amount of water may remain in the dispensers after
the wash cycle is complete. This is normal.
This washer has a tight seal to avoid water leaks. To avoid
odors, leave the door open to allow the washer to dry
between uses.
12.
Touch and hold START to begin
wash cycle
Touch and hold START to start the wash cycle. To pause
a cycle in progress, touch START once, then touch and
hold again to continue the cycle. To cancel a cycle, touch
POWER.
Once you touch and hold START, you will hear the door lock,
unlock, and lock again. The washer door will remain locked
during the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2
missed garments, you may do so while the
“Add Garment” light is lit. The time allowed
to add a garment will vary based on cycle
selection and load size.
Touch START once; the door will unlock once
the washer movement has stopped. This may
take several minutes. Then close the door and
touch and hold START again to restart the cycle.
Adding items after
Add Garment
light
is off:
Cancel current cycle. Water will drain and you will need to
reselect cycle and restart.
For wash performance and optimal energy
savings, add
garments only when the “Add Garment” light is on.