Maytag MOED6030LZ Control Guide - Page 3

KEYPAD Self Clean Control Lock Hold 3 Sec Settings FEATURE Self-cleaning cycle Oven control lockout Oven use functions INSTRUCTIONS See the "Self-Cleaning Cycle" section in the Owner's Manual. 1. Check that the ovens and timers are off. 2. Press and hold Control Lock for 3 seconds. 3. If enabled, a tone will sound and the controls will be locked. 4. Repeat to unlock. No keypads will function with the controls locked. Enables you to personalize the audible tones and oven operation to suit your needs. OVEN USE Odors and smoke are normal when the oven is used the first few times or when it is heavily soiled. IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well ventilated room. Electronic Oven Controls Control Display The display will light up when first powered up or after a power loss. When oven is not in use, the time of day is displayed. Tones Tones are audible signals, indicating the following: One Tone � Valid keypad press. � Oven is preheated (long tone). � Kitchen timer (long tone with reminder tone every 60 seconds). � Function has been entered. Three Tones � Invalid keypad press. Four Tones � End of cycle (with reminder tone every 60 seconds). Use the Settings keypad to change the tone settings. Settings Many features of the oven control can be adjusted to meet your personal needs. These changes are made using the Settings keypad. Use the Settings keypad to scroll through the features that can be changed. Each press of the Settings keypad will advance the display to the next setting. After selecting the feature to be changed, the control will prompt you for the required input. Details of all of the feature changes are explained in the following sections. Press CANCEL to exit Settings. Fahrenheit and Celsius The temperature is preset to Fahrenheit, but can be changed to Celsius. 1. Press Settings until "TEMP UNIT" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press CANCEL to exit and display the time of day. Audible Tones Disable 1. Press Settings until "SOUND" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press CANCEL to exit and display the time of day. Sound Volume Sets the pitch of the tone to either high or low. 1. Press Settings until "SOUND VOLUME" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press CANCEL to exit and display the time of day. End of Cycle Tone Activates or turns off the tones that sound at the end of a cycle. 1. Press Settings until "END TONE" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press CANCEL to exit and display the time of day. Keypress Tones Activates or turns off the tones when a keypad is pressed. 1. Press Settings until "KEYPRESS TONE" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press CANCEL to exit and display the time of day. Reminder Tones Disable Turns off the short repeating tone that sounds every 1 minute after the end of cycle tones. 1. Press Settings until "REMINDER TONE" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press CANCEL to exit and display the time of day. 12/24 Hour Clock 1. Press Settings until "12/24 HOUR" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press CANCEL to exit and display the time of day. 12-Hour Shutoff The oven control is set to automatically shut off the oven 12 hours after the oven initiates a cook or clean function. This will not interfere with any Timed or Delayed Timed Cook functions. 1. Press Settings until "12 HR AUTO OFF" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press CANCEL to exit and display the time of day. Languages - Scrolling Display Text Language options are English, Spanish, and French. 1. Press Settings until "LANGUAGE" is displayed. 2. The current setting will be displayed. 3. Press the number keypad as instructed by the scrolling text to select the new language. 4. Press CANCEL to exit and display the time of day. 3