Maytag MSS25C4MGW Installation Instructions - Page 11
Lights, Vacation and Moving Care
View all Maytag MSS25C4MGW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Lights NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. ■■ The dispenser lights are LEDs that cannot be changed. ■■ On some models, the interior lights are LEDs that cannot be changed. ■■ On some models, the interior lights require a 40-watt bulb. 1. Unplug refrigerator or disconnect power. 2. Remove light shield when applicable. NOTE: To clean the light shield, wash it with warm water and liquid detergent. Rinse and dry the shield well. 3. Remove light bulb and replace with one of the same size, shape and wattage. 4. Replace light shield when applicable. 5. Plug in refrigerator or reconnect power. Vacation and Moving Care Vacations If You Choose to Leave Refrigerator On While You Are Away: 1. Use up any perishables and freeze other items. 2. If your refrigerator has an automatic ice maker and is connected to the household water supply, turn off the water supply to the refrigerator. Property damage can occur if the water supply is not turned off. 3. If you have an automatic ice maker, turn off the ice maker. NOTE: Depending on your model, raise the wire shut-off arm to OFF (up) position or press the switch to OFF (right). 4. Empty the ice bin. If You Choose to Turn Refrigerator Off Before You Leave: 1. Remove all food from the refrigerator. 2. If your refrigerator has an automatic ice maker: ■■ Turn off the water supply to the ice maker at least one day ahead of time. ■■ When the last load of ice drops, raise the wire shut-off arm to the OFF (up) position or move the switch to the OFF (right) setting. 3. Unplug refrigerator. 4. Clean, wipe, and dry thoroughly. 5. Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up. Moving When you are moving your refrigerator to a new home, follow these steps to prepare it for the move. 1. If your refrigerator has an automatic ice maker: ■■ Turn off the water supply to the ice maker at least one day ahead of time. ■■ Disconnect the water line from the back of the refrigerator. ■■ When the last load of ice drops, raise the wire shut-off arm to the OFF (up) position or move the switch to the OFF (right) setting. 2. Remove all food from the refrigerator and pack all frozen food in dry ice. 3. Empty the ice bin. 4. Unplug refrigerator. 5. Clean, wipe, and dry thoroughly. 6. Take out all removable parts, wrap them well, and tape them together so they don't shift and rattle during the move. 7. Depending on the model, raise the front of the refrigerator so it rolls more easily or screw in the leveling legs so they don't scrape the floor. See "Adjust the Doors" or "Door Removal, Leveling and Alignment." 8. Tape the doors closed and tape the power cord to the back of the refrigerator. When you get to your new home, put everything back and refer to the Installation Instructions for preparation instructions. Also, if your refrigerator has an automatic ice maker, remember to reconnect the water supply to the refrigerator. 11