Maytag MTF1842EEW User Instructions - Page 6

Style2,slidetrimintoplace.

Get Maytag MTF1842EEW - 18 cu. Ft. Refrigerator PDF manuals and user guides View all Maytag MTF1842EEW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

6. Removdeoorstop.Movetooppositseideofrefrigeratdooror asshowninGraphi5c. 7. Positiornefrigerathoar ndloenoppositseideofthe refrigeratdoor orasshowninGraphi6c-3.Drivetoptwo screwisnhandlfeirst.Alignlowepr ortionofhandleanddrive bottomscrew. 8. Alignrefrigerathoar ndlebottomtrim.ForStyle1,slidetrim intoplaceandattachbottomscrewS. eeGraphi6c-1.For Style2,slidetrimintoplaceS. eeGraphi6c-2. 9. TighteanllscrewsS.etasiderefrigeratdoor oruntibl ottom hingeisinstalleodnproduct. Contour Doors 3. Assemble the parts for the top hinge as shown in Top Hinge graphic. Do not tighten screws completely. 4. Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all screws. Final Steps 1. Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover. See Top Hinge graphic. 2. Replace the base grille. See Base Grille graphic. Round-Head Handle Screw Door Handle Screw Hole Plug Cabinet 1. Remove 5/le" hex-head hinge screws from handle side and move them to opposite side. See Graphic 1. 2. Remove cabinet hinge hole plugs from the cabinet top and move them to opposite side hinge holes as shown in Graphic 2. Doors 1. Remove the door hinge hole plug from top of refrigerator door. Move it to the opposite side as shown in Graphic 3. 2. Remove door stop from both the freezer and refrigerator doors and move to the other side. See Graphics 4 and 5. Replace Doors and Hinges NOTE: Graphic may be reversed if door swing is reversed. 1. Replace the parts for the bottom hinge as shown. Tighten screws. See Bottom Hinge graphic. Replace the refrigerator door. NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working. 2. Assemble the parts for the center hinge as shown and tighten all screws. See Center Hinge graphic. Replace the freezer door. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 3. Plug into a grounded 3 prong outlet. 4. Return all removable door parts to doors and food to refrigerator. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
6. Remove
doorstop.Move
toopposite
sideofrefrigerator
door
asshown
inGraphic
5.
7. Position
refrigerator
handle
onopposite
sideofthe
refrigerator
doorasshown
inGraphic
6-3.Drive
toptwo
screws
inhandle
first.Align
lower
portionofhandleanddrive
bottomscrew.
8. Align
refrigerator
handlebottom
trim.ForStyle1,slide
trim
intoplaceandattachbottomscrew.
SeeGraphic
6-1.For
Style2,slidetrimintoplace.
SeeGraphic
6-2.
9. Tighten
allscrews.
Setaside
refrigerator
dooruntil
bottom
hinge
isinstalled
onproduct.
Contour Doors
Round-Head
Door Handle
Handle Screw
Screw Hole Plug
Cabinet
1.
Remove 5/le" hex-head
hinge screws
from handle side and
move them to opposite
side. See Graphic
1.
2.
Remove
cabinet
hinge hole plugs from the cabinet
top and
move them to opposite
side hinge holes as shown
in
Graphic
2.
Doors
1.
Remove
the door hinge hole plug from top of refrigerator
door. Move it to the opposite
side as shown
in Graphic
3.
2.
Remove
door stop from both the freezer and refrigerator
doors
and move to the other side. See Graphics
4 and 5.
Replace
Doors
and
Hinges
NOTE: Graphic
may be reversed
if door swing is reversed.
1.
Replace the parts for the bottom
hinge as shown.
Tighten
screws.
See Bottom
Hinge graphic.
Replace the refrigerator
door.
NOTE: Provide
additional
support
for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors
in place while you are working.
2.
Assemble
the parts for the center hinge as shown
and tighten
all screws.
See Center Hinge graphic.
Replace the freezer
door.
3.
Assemble
the parts for the top
hinge as shown
in Top Hinge
graphic.
Do not tighten
screws
completely.
4.
Line up the doors so that the bottom
of the freezer door
aligns evenly with the top of the refrigerator
door. Tighten
all
screws.
Final Steps
1.
Check all holes to make sure that hole plugs and screws
are
in place. Reinstall top hinge cover. See Top Hinge graphic.
2.
Replace the base grille. See Base Grille graphic.
Electrical
Shock
Hazard
Plug into
a
grounded
3 prong
outlet.
Do
not
remove
ground
prong.
Do
not
use an adapter.
Do
not
use an extension
cord.
Failure
to follow
these
instructions
can result
in
death,
fire, or electrical
shock.
3.
Plug into a grounded
3 prong outlet.
4.
Return
all removable
door
parts to doors
and food to
refrigerator.
6