Maytag MVWB750WQ Dimension Guide - Page 1
Maytag MVWB750WQ - Bravos Washer With Window Lid Manual
UPC - 883049179711
View all Maytag MVWB750WQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Top-Loading Washer PRODUCT MODEL NUMBERS MVWB400V, MVWB700V, MVWB750W, MVWB300W, MVWB450W, MVWB750W, MVWB850W, MVWB755Y Electrical: A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this washer be provided. DRAIN SYSTEM OVERALL DIMENSIONS 17"* (432 mm) 14"* max. (356mm) 48 in.2* (310 cm2) 24 in.2* (155 cm2) 27 1/2" 1" 1" 27" 5"* (699 mm) (25 mm)(25 mm)(686 mm) (127 mm) Front view Side view * Required spacing Drain system can be installed using a floor drain, wall standpipe, floor standpipe, or laundry tub. Select method you need. 39" (990 mm) Wall standpipe Floor standpipe The standpipe drain requires a minimum diameter standpipe of 2" (51 mm). The minimum carryaway capacity can be no less than 17 gal. (64 L) per minute. A 2" (51 mm) diameter to 1" (25 mm) diameter standpipe adapter kit is available. See "Tools and Parts". Spacing for recessed area or closet installation All dimensions show recommended spacing allowed, with tested spacing of 0" (0 mm) clearance on sides. ■■ Additional spacing should be considered for ease of installation and servicing. ■■ Additional clearances might be required for wall, door, and floor moldings. ■■ Additional spacing should be considered on all sides of the washer to reduce noise transfer. ■■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilitation openings are acceptable. ■■ Companion appliance spacing should also be considered. The top of the standpipe must be at least 39" (990 mm) high and no higher than 96" (2.4 m) from the bottom of the washer. 39" (990 mm) 28" (710 mm) Laundry Tub Floor The laundry tub drain system needs a minimum 20 gal. (76 L) capacity laundry tub. The top of the laundry tub must be at least 39" (990 mm) above the floor and no higher than 96" (2.4 m) from the bottom of the washer. The floor drain system requires a siphon break that may be purchased separately. See "Tools and Parts". The siphon break must be a minimum of 28" (710 mm) from the bottom of the washer. Additional hoses might be needed. Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice. Ref. W10240438B 01/2011