Maytag MVWB850YG Use & Care Guide - Page 10

7. Select cycle Turn cycle knob to choose your wash cycle. Estimated Time Remaining will light up with a cycle time. You may notice time adjusting during the cycle. This is normal. Wash Temp Suggested Fabrics Hot Some cold water is added to save energy. This may be cooler than your hot water heater setting. Whites and pastels Durable garments Heavy soils Warm Some cold water will be added, so this may be cooler than what your previous washer provided. Bright colors Moderate to light soils Cool Warm water is added to assist in soil removal and to help dissolve detergents. Cold Warm water may be added to assist in soil removal and to help dissolve detergents. Colors that bleed or fade Light soils Dark colors that bleed or fade Light soils 9. Select cycle options 8. Select cycle modifiers Once you select a cycle, the default settings for that cycle will be lit. Press the Modifier buttons to change the Wash Temp, Spin Speed, and Soil Level, if desired. Not all settings are available with all cycles. NOTE: Always read and follow fabric care labels instructions to avoid damage to your garments. Select any other cycle options you may wish to add, if not previously set. Some cycles will automatically add certain options such as Extra Rinse. These may be turned off, if desired. NOTE: Not all options are available with all cycles. 10. Press START/PAUSE to begin wash cycle Press the START/PAUSE button to start the wash cycle. When the cycle has finished, the end of cycle signal will sound (if set). Promptly remove garments when cycle is done to avoid odor, reduce wrinkling, and rusting of metal hooks, zippers, and snaps. If lid is left open for more than 10 minutes the water will pump out. 10