Maytag MVWC450XW Dimension Guide - Page 1
Maytag MVWC450XW Manual
View all Maytag MVWC450XW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Top-Loading Washer PRODUCT MODEL NUMBERS MVWC200X, MVWC400X, MVWC450X, MVWX500X, MVWX600X, MVWX700X, MVWC300X, MVWX550X Washer dimensions OVERALL DIMENSIONS 271/2" 27" (699 mm) (686 mm) Electrical: A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this washer be provided. DRAIN SYSTEM Floor standpipe drain system 42" (1067 mm) 41/2" (114 mm) Minimum diameter for a standpipe drain: 2" (51 mm). Minimum carry-away capacity: 17 gal. (64 L) per minute. Top of standpipe must be at least 39" (990 mm) high; install no higher than 96" (2.44 m) from bottom of washer. If you must install higher than 96" (2.44 m), you will need a sump pump system. For closet installation, with a door, the minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent air ventilation openings are acceptable. 3" (76 mm) Wall standpipe drain system 14" max. (356 mm) 48 in.2 (310 cm2) 17" (432 mm) 41/2" (114 mm) See requirements for floor standpipe drain system. Floor drain system 5" (126 mm) 24 in.2 (155 cm2) Floor drain system requires additional parts. Minimum siphon break: 28" (710 mm) from bottom of washer. Laundry tub drain system 41/2" (114 mm) 30" (762 mm) 1" (25 mm) 1" (25 mm) 3" (76 mm) Dimensions show recommended spacing allowed, except for closet door ventilation openings which are minimum required. This washer has been tested for installation with spacing of 0" (0 mm) clearance on the sides. Consider allowing more space for ease of installation and servicing, and spacing for companion appliances and clearances for walls, doors, and floor moldings. Add spacing of 1" (25 mm) on all sides of washer to reduce noise transfer. If a closet door or louvered door is installed, top and bottom air openings in door are required. Minimum capacity: 20 gal. (76 L). Top of laundry tub must be at least 39" (990 mm) above floor; install no higher than 96" (2.44 m) from bottom of washer. IMPORTANT: To avoid siphoning, no more than 4.5" (114 mm) of drain hose should be inside standpipe or below the top of wash tub. Secure drain hose with cable tie. Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice. Ref. W10240509C 02/2011