Maytag MVWC555DW Use & Care Guide - Page 5

Rinse, Lid Locked

Page 5 highlights

RINSE You will hear sounds similar to the wash cycle as the washer rinses and moves the load. Fabric softener will be added if the Fabric Softener-On option was selected. SPIN The washer spins the load at increasing speeds for proper water removal, based on the selected cycle and spin speed. As the washer decelerates you will hear a whirring sound. This is normal. DONE Once the cycle is complete, this light will come on. Remove the load promptly for best results. LID LOCKED To allow for proper load sensing and spinning, the lid will lock and the Lid Locked light will turn on. This light indicates that the lid is locked and cannot be opened. If you need to open the lid, press Start/Pause. The lid will unlock once the washer movement has stopped. This may take several minutes if the load was spinning at high speed. Press Start/Pause again to resume the cycle. NOTE: Holding the Start/Pause Button will cancel the cycle and cause the washer to drain. Avoid opening the lid during sensing. The sensing process will start over when the washer is restarted. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

5
RINSE
You will hear sounds similar to the wash cycle as the washer
rinses and moves the load. Fabric softener will be added if
the Fabric Softener-On option was selected.
SPIN
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin speed.
As the washer decelerates you will hear a whirring sound.
This is normal.
DONE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LID LOCKED
To allow for proper load sensing and spinning, the lid will
lock and the Lid Locked light will turn on. This light
indicates that the lid is locked and cannot be opened.
If you need to open the lid, press
Start/Pause. The lid will unlock once
the washer movement has stopped.
This may take several minutes if the
load was spinning at high speed.
Press Start/Pause again to resume
the cycle.
NOTE:
Holding the Start/Pause Button will cancel the
cycle and cause the washer to drain.
Avoid opening the lid during sensing. The sensing process
will start over when the washer is restarted.