Maytag MVWX655DW Use & Care Guide - Page 8

Using Laundry Product Dispensers

Page 8 highlights

Using Laundry Product Dispensers NOTE: Do not add single-dose laundry packets, color-safe bleach, Oxi-type boosters, or fabric softener crystals to dispensers. They will not dispense correctly. Add to the basket prior to adding laundry. 4. Add HE detergent HE removal detergent tray 6. A dd liquid fabric softener to dispenser Fabric softener tray Add a measured amount of HE liquid detergent into detergent tray. This tray holds 3 oz. (89 mL). If adding powder HE detergent remove inside tray. Do not overfill tray - adding too much detergent may cause detergent to be dispensed into the washer too early. NOTE: Make sure tray is in drawer when using liquid detergent and removed when using powder detergent and do not go over the Max line. IMPORTANT: Use only High Efficiency detergents. The package will be marked "HE" or "High Efficiency." Low-water washing creates excessive sudsing with a regular non-HE detergent. Using regular detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew. HE detergents are made to produce the right amount of suds for the best performance. Follow the manufacturer's instructions to determine the amount of detergent to use. HELPFUL TIP: See "Washer Maintenance" for information recommended method of cleaning washer dispenser trays. 5. Add liquid chlorine bleach to dispenser Pour a measured amount of liquid fabric softener into tray; always follow manufacturer's directions for correct amount of fabric softener based on your load size. Close dispenser drawer, then select Fabric Softener - On option. Fabric Softener is added during rinse. IMPORTANT: Fabric Softener option must be selected to ensure proper distribution at correct time in cycle. Do not overfill or dilute. Overfilling dispenser will cause fabric softener to immediately dispense into washer. If Extra Rinse option is selected, fabric softener will be dispensed into the last rinse. It is normal for a small amount of water to remain in the dispenser at the end of a cycle. 7. Select cycle Liquid Chlorine Bleach Do not overfill, dilute, or use more than 1 cup (250 mL). Do not use color-safe bleach or Oxi products in the same cycle with liquid chlorine bleach. 8 Turn cycle knob to choose your wash cycle.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

8
Turn cycle knob to choose your wash cycle.
7.
Select cycle
Liquid
Chlorine Bleach
5.
Add liquid chlorine bleach
to dispenser
Do not overfill, dilute, or use more than 1 cup (250 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
Add a measured amount of
HE liquid detergent into detergent
tray. This tray holds 3 oz. (89 mL). If
adding powder HE detergent remove inside tray. Do not overfill
tray - adding too much detergent may cause detergent to be
dispensed into the washer too early.
NOTE:
Make sure tray is in drawer when using liquid detergent
and removed when using powder detergent and do not go over
the Max line.
IMPORTANT:
Use only High Efficiency detergents. The
package will be marked “HE” or “High Efficiency.” Low-water
washing creates excessive sudsing with a regular non-HE
detergent. Using regular detergent will likely result in longer
cycle times and reduced rinsing performance. It may also result
in component failures and noticeable mold or mildew. HE
detergents are made to produce the right amount of suds for
the best performance. Follow the manufacturer’s instructions to
determine the amount of detergent to use.
HELPFUL TIP:
See “Washer Maintenance” for information
recommended method of cleaning washer dispenser trays.
4.
Add HE detergent
HE removal
detergent tray
NOTE:
Do not add single-dose laundry packets, color-safe bleach,
Oxi-type boosters, or fabric softener crystals to dispensers. They will
not dispense correctly. Add to the basket prior to adding laundry.
Using Laundry Product Dispensers
6.
Add liquid fabric softener
to dispenser
Pour a measured amount of liquid fabric
softener into tray; always follow manufacturer’s
directions for correct amount of fabric softener
based on your load size. Close dispenser
drawer, then select Fabric Softener - On option.
Fabric Softener is added during rinse.
IMPORTANT:
Fabric Softener option must be selected
to ensure proper distribution at correct time in cycle. Do not
overfill or dilute. Overfilling dispenser will cause fabric softener
to immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed into the last rinse.
It is normal for a small amount of water to remain in the
dispenser at the end of a cycle.
Fabric softener tray