Maytag MZF34X18FW Owners Manual - Page 5

Door 1. Remove the hinge hole plug from the top of the door. 2. Remove the door stop from the bottom of the door. 3. Move the door stop to the opposite side making sure that the hole in the door stop bracket is aligned perfectly with the hole in the door for the bottom hinge pin. 4. Using the screws removed in Step 2, fasten the door stop bracket to the bottom of the door. 5. Tighten all screws. Set aside the door until the bottom hinge is in place. Final Steps 1. Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover. See "Top Hinge" graphic. 2. Using the provided decals, cover the remaining holes located on the side opposite the bottom hinge. WARNING Replace Door and Hinges NOTE: Graphic may be reversed if door swing is reversed. 1. Replace the parts for the bottom hinge as shown and tighten screws. See "Bottom Hinge" graphic. Replace the freezer door. NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door magnets to hold the door in place while you are working. 2. Assemble the parts of the top hinge as shown in the "Top Hinge" graphic. Do not tighten the screws completely. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 3. Plug into a grounded 3 prong outlet. 4. Reset the control. See "Using the Control." 5. Return all removable door parts to door and food to freezer. 5