Memorex MC7100 User Guide - Page 7
Installation
View all Memorex MC7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
INSTALLATION AC ADAPTER CONNECTION Connect the AC adapter (included) to an AC outlet having 120V, 60Hz AC only. Plug the small end into the DC jack on the rear of the unit. CAUTION: Do not touch the AC adapter with wet hands. Fully insert the plug without exposing any part of the blade. Z DC 6V INSERTING BATTERIES Two AAA size batteries can also be used to power and/or to provide a backup for the clock and alarm time for this unit as follows: 1. Open the battery door by sliding it towards the bottom of the unit. 2. Insert two (2) "AAA" batteries as shown. Alkaline batteries are recommended for the longest playing time. 3. Slide the battery door back on. NOTE: The batteries are used to back-up the clock and alarm time only when the AC adapter is disconnected or if there is a power failure. ++ BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with fresh ones. 4. If the device is not to be used for a long period of time, remove the batteries to pre- vent damage or injury from possible battery leakage. 5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer's directions.) BACKLIGHT If the power supply is connected to the DC 6V IN jack, the backlight will always light on in the display. 6