Memorex MC7101 User Guide - Page 16

OPERATION (CONTINUED) TO SET OR RESET THE ALARM TIME 1 1 2 2 3 4 1 2 With the power off, press the desired ALARM 1 1 or ALARM 2 2 button; the Alarm 1 or Alarm 2 time and settings will appear. Press and hold the desired ALARM 1 1 or ALARM 2 2 button; the alarm time will blink. Press the MINUTE button 3 to set the alarm minute and the HOUR button 4 to set the alarm hour. Make sure to set the correct AM/PM setting. Press the ALARM 1 1 or ALARM 2 2 button again (or wait approx. 15 seconds); the alarm time will stop blinking. 3 1 4 2 2 1 Repeatedly press the ALARM 1 1 or ALARM 2 2 button to select alarm off, alarm on for buzzer, radio or CD. NOTE: Make sure the corresponding indicator (BUZZER/CD/RADIO) appears in the display. If set to CD, within 5 seconds, set the track number using the Tune/Skip/Search l 1 or m 2 button. When the alarm time is reached, the unit will start playback on the track that you selected and the tracks following it, then stop. NOTES: • When you have selected a track number, after five seconds, the track number will be set and the actual time will appear in the display again. • If the selected track is not available (i.e. there are a total of 10 tracks on the disc but you have selected track 11), when the alarm time is reached, playback will start from the first track. If set to Radio, within 5 seconds, set the band (AM or FM) and the frequency using the Tune/Skip/Search l 1 or m 2 button. When the alarm time is reached, the unit will turn on the band (AM or FM) and the frequency that you selected. NOTE: When you have selected the radio band and frequency, after 5 seconds, the radio frequency will be set and the actual time will appear in the display again. SEE NEXT PAGE FOR IMPORTANT ALARM NOTES. 15