Memorex MD6883SIL User Guide - Page 11

Cd Operation Continued

Page 11 highlights

CD OPERATION (CONTINUED) NOTES: • This unit is capable of playing standard CDs or 3" singles; no adapter is required. • If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show "no disc". • As each track is played, the track number and elapsed time are shown in the display. • To remove the disc, open the CD compartment, hold the edge of the CD and gently press the center pivot and lift the CD. • The maximum time of a CD is 74 minutes for this unit. • "OPEN" will appear in the display when the CD door is opened. ANTI-SHOCK SYSTEM This CD player has a built-in Anti-Shock System that cuts down on CD skipping. Follow the steps below to activate and understand the Anti-Shock System. 1 2 1 2 Open the CD compartment door by sliding the CD OPEN switch 1 to the right. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment door. Insert headphones into 3 the PHONES jack. Slide the FUNCTION switch 2 to the CD position. With a CD inserted, press the PLAY/PAUSE (®p)/POWER ON button to turn the unit on. 2 1 1 3 4 3 2 1 The Anti-Shock System will start automatically, the sound will mute for a moment and the display will show the Anti-Shock indicator with no bars in it. Within a few seconds, the Anti-Shock indicator will fill to indicate music signals are stored in memory. CONTINUED ON THE NEXT PAGE 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

10
CD OPERATION (CONTINUED)
Open the CD compartment door by sliding
the CD OPEN switch
1
to the right. Gently
press a disc, label side up, onto the spindle
until it locks in place. Close the CD
compartment door. Insert headphones into
the PHONES jack. Slide the FUNCTION
switch
2
to the CD position.
2
1
1
With a CD inserted, press the
PLAY/PAUSE (
®p
)/POWER ON
button to turn the unit on.
2
ANTI-SHOCK SYSTEM
This CD player has a built-in Anti-Shock System that cuts down on CD skipping.
Follow the steps below to activate and understand the Anti-Shock System.
The Anti-Shock System will start
automatically, the sound will mute for a
moment and the display will show the
Anti-Shock indicator with no bars in it.
3
Within a few seconds, the Anti-Shock
indicator will fill to indicate music
signals are stored in memory.
4
CONTINUED ON THE NEXT PAGE
NOTES:
This unit is capable of playing standard CDs or 3” singles; no adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will
show “no disc”.
As each track is played, the track number and elapsed time are shown in the display.
To remove the disc, open the CD compartment, hold the edge of the CD and gently
press the center pivot and lift the CD.
The maximum time of a CD is 74 minutes for this unit.
“OPEN” will appear in the display when the CD door is opened.