Memorex MD6886-01 Operating Instructions - Page 8

MD6886.O/M.QXD 2/11/03 8:14 AM Page 7 RADIO OPERATION TO LISTEN TO THE RADIO 1 2 2 !  1 Set the VOLUME control ❶ to minimum and plug the headphone into the PHONES jack. Press the PLAY/PAUSE ( ) /POWER ON button ❷ to turn the unit on. Slide the FUNCTION switch ❶ to the RADIO position. Press the ESP/BAND button ❷ to select a band (AM or FM). If listening to FM, press the MODE button ❸ to turn FM Stereo ON or OFF. 3 4 ! 12  Press and release the SKIP/SEARCH/ Tuning ❶ or button ❷ to tune a station. Press and hold the SKIP/SEARCH/Tuning ❶ or button ❷ for Auto Scan (see below). Adjust the VOLUME control ❶ and DBBS switch ❷ as desired. If FM STEREO reception is weak/noisy, press the MODE button ❸ to turn off Stereo, in this case the reception will be monaural. 5 To turn the radio off, press the STOP (■)/POWER OFF button. ANTENNAS AM - This unit has a built-in ferrite bar antenna, which provides adequate reception in most areas. If reception is weak, turn the unit to improve reception. FM - The headphones act as an antenna for FM. Extend the headphone wire for best FM reception. AUTO SCAN Press and hold the SKIP/SEARCH/Tuning or button for approximately one second and the unit will automatically search for the next available station. 7