Memorex MI3005 Manual - Page 7
Power Source - ac adapter
UPC - 749720006458
View all Memorex MI3005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
POWER SOURCE AC CONNECTION Insert the small end of the AC adapter into the POWER IN jack (located on the rear of the unit). Connect the AC cord to the adapter and connect the other end to a wall outlet having 120V AC, 60 Hz. AC Outlet AC Plug NOTES: • Only use the supplied AC adapter which has the following specs: DC 12V Z • The AC adapter supplied with the unit is polarized to help minimize the possibility of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut the wide blade. It is the user's responsibility to have an electrician replace the obsolete outlet. • Remove both the DC plug and the AC-IN plug to disconnect the AC adapter when not using. • The batteries are automatically disconnected when the AC adapter is used. BATTERY INSTALLATION To use this unit with battery power, remove the battery door on the rear of the unit and insert eight (8) 'D' size batteries following the illustration. NOTE: The AC power cord must be disconnected from the POWER IN jack on the rear of the unit in order for the unit to operate on battery power. - +- +- +- + - +- +- +- + BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon- zinc) or old batteries with fresh ones. 4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer's directions.) 6