Memorex MI4004BLK User Manual - Page 7
Power Source - specs
View all Memorex MI4004BLK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
POWER SOURCE AC CONNECTION Insert the small end of the AC adapter into the DC 13.5V IN jack (located on the rear of the unit). Connect the other end to a wall outlet having 120V AC, 60 Hz. AC Adapter, DC 13.5V Z NOTES: • The AC adapter supplied with the unit is polarized to help minimize the possibility of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, blade. It is have an do not file or cut the wide the user's responsibility to electrician replace the When using a grounding adapter, make sure the receptacle box is fully grounded. obsolete outlet. Grounding Lead • Remove both the DC plug and the AC- IN plug to disconnect the AC adapter when not in use. Screw • Only use the supplied AC Adapter Receptacle which has the following specs: DC 13.5V Z Grounding Adapter Receptacle Box Cover BACKLIGHT When the AC adapter is connected to the unit, the LCD backlight will always be on. BATTERY INSTALLATION Two (2) "AAA" size batteries can also be used to power and/or to provide a backup for the clock and alarm time for this unit as follows: 1. Open the battery door by pushing in on the tab, then removing the door. 2. Insert two (2) "AAA" batteries as shown. Alkaline batteries are recommended for the longest playing time. 3. Place the battery door back on the compartment. NOTES: • The batteries are used to back-up the clock and alarm times when the AC adapter is disconnected or there is a power failure. • The battery indicator will appear or blink in the display when there are no batteries or the batteries are low and need replacing. IMPORTANT! See BATTERY PRECAUTIONS on the next page. 6