Memorex MKA381 Manual - Page 5
Operation - wireless
UPC - 749720002467
View all Memorex MKA381 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
OPERATION USING YOUR MICROPHONE (TRANSMITTING) To use your microphone, please see the following: 1 2 Insert the large end of the cord into the Microphone jack on the unit you are connecting this wireless microphone to, and the small end into the Line OUT jack on the receiver. Slide the Microphone ON/STANDBY/ OFF switch to the ON position; the POWER indicator on the microphone will light. 3 4 Slide the Receiver's POWER switch to the ON position; the red POWER indicator on the receiver will light. If the microphone is on, the green Microphone ON indicator on the receiver will also light. Raise the antenna for best reception and speak or sing into the microphone as desired. Slide the Microphone ON/STANDBY/ OFF switch to the STNBY (Standby) position to put the microphone in Standby mode (it will be on, but will not transmit). Slide the Microphone ON/STANDBY/OFF switch to the OFF position to turn the microphone off; the POWER indicator on the mic and the green MIC indicator on the receiver will go out. NOTES: • When done using the receiver, slide the POWER switch to the OFF position; the red POWER indicator will go out. • If your microphone is not to be used for a long period of time, remove the batteries in the microphone and the receiver. • If the microphone is out of range (microphone too far away from the receiver) the green Microphone ON indicator on the receiver will turn off and the microphone will be muted. 4