Memorex MX4137 User Guide - Page 15

OPERATING INSTRUCTIONS (CONTINUED) REPEAT PLAYBACK OF ONE TRACK OR ALL TRACKS 1 2 3 3 2 4 1 2 1 To repeat a single track, while in the Stop mode, press the REPEAT/MEM-UP button ‚ once; "REP" will blink in the display. Press the Tune/Skip/Search o 2 or n 3 button to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE (®p) button … to begin playback. The specific track you selected will be repeated continuously. To repeat all of the tracks on a disc continuously, while in the Stop mode, press the REPEAT/MEM-UP button ‚ twice; "REP" will light solid in the display. Press the PLAY/PAUSE (®p) button ƒ to begin all tracks repeating. To cancel Repeat Playback, press the REPEAT/MEM-UP button until "REP" disappears from the display. PROGRAMMED PLAYBACK The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once. To perform programmed playback, proceed as follows: 1 2 3 Press the CD Function button; "CD" appears in the display. NOTE: You can also repeatedly press the FUNCTION button on the remote to select CD. 2 Press the CD OPEN button and gently press a CD onto the center spindle with the label side facing forward and close the CD compartment. NOTE: 3 inch single or standard CDs can be used with this unit. Press the MEM/CLOCK ADJ button; "P-01" (program number) and "01" (track number) will appear and "MEM" will blink in the display. 1 PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE. 2 14