Memorex Mi4019-BLK User Guide - Page 5
Power Source - what
UPC - 749720012763
View all Memorex Mi4019-BLK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
POWER SOURCE AC CONNECTION Insert the small end of the AC adapter into the DC IN 12V jack (located on the rear of the unit). Connect the other end to a wall outlet having 120V AC, 60 Hz. AC Adapter, DC 12V Z NOTES: • Remove both the DC plug and the AC- IN plug to disconnect the AC adapter when not in use. • Only use the supplied AC adapter which has the following specs: DC 12V Z BATTERY INSTALLATION Two (2) "AAA" size batteries can also be used to power and/or to provide a backup for the clock and alarm time for this unit as follows: 1. Open the battery door by pushing in on the tab, then removing the door. 2. Insert two (2) "AAA" batteries as shown. Alkaline batteries are recommended for the front of unit longest playing time. 3. Place the battery door back on the compartment. NOTES: • The batteries are used to back-up the clock and alarm times when the AC adapter is disconnected or there is a power failure. • The battery indicator will blink in the display when there are no batteries or the batteries are low and need replacing. BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the Battery Compartment. A reversed battery may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with fresh ones. 4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer's directions.) 5