Metabo KHE 56 Operating Instructions - Page 10

ENG ENGLISH Original instructions Dear Customer, Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power tool is carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless, the service life of a power tool depends to a great extent on you. Please observe the information contained in these instructions and the enclosed documentation. The more carefully you treat your Metabo power tool, the longer it will provide dependable service. Contents 1 Declaration of Conformity 2 Specified Use 3 General Safety Instructions 4 Special Safety Instructions 5 Overview 6 Special Product Features 7 Commissioning 7.1 Assembly of the bow handle or additional handle 8 Use 8.1 Adjusting the depth stop (only for KHE 56) 8.2 Attaching and removing tools 8.3 Setting the operating mode 8.4 Adjusting the chisel position 8.5 Adjusting the impact force 8.6 Switching on and off 8.7 Metabo VibraTech (MVT) 9 Cleaning, Maintenance 10 Tips and Tricks 11 Troubleshooting 12 Accessories 13 Repairs 14 Environmental Protection 15 Technical Specifications 2 Specified Use The KHE 56 is designed for hammer drilling and chiselling in concrete, bricks, stone and similar materials when used in combination with appropriate accessories. The MHE 56 is designed for chiselling in concrete, bricks, stone and similar materials when used in combination with appropriate accessories. The user bears sole responsibility for damage caused by improper use. Generally accepted accident prevention regulations and the enclosed safety information must be observed. 3 General Safety Instructions WARNING Read all safety warnings and instructions. Failure to follow all safety warnings and instructions may result in electric shock, fire and/or serious injury. Keep all safety instructions and information for future reference. Before using this power tool, carefully read through and familiarise yourself with all the enclosed safety information (red booklet) and the instructions. Keep all enclosed documentation for future reference, and pass on your power tool only together with this documentation. 1 Declaration of Conformity We, being solely responsible, hereby declare that these rotary and chipping hammers conform to the standards and directives specified on page 2. MHE 56: 2000/14/EC: Procedure for assessing conformity as per Appendix VI. (Testing centre: VDE Testing and Certification Institute, Merianstr. 28, 63069 Offenbach, Germany). 4 Special Safety Instructions For your own protection and for the protection of your power tool pay attention to all parts of the text that are marked with this symbol! Wear ear protectors. Exposure to noise can cause loss of hearing. Use the additional handles supplied with the tool. Loss of control can lead to injuries. Hold the power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory 10