Metabo KNS 18 LTX 150 Operating Instructions - Page 15

If you have Metabo electrical tools that require repairs, please contact your Metabo service centre. For addresses see www.metabo.com. You can download spare parts lists from www.metabo.com. 13. Environmental Protection The sanding dust generated may contain hazardous materials: do not dispose of with the household waste, but at a special collection point for hazardous waste. Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories. Battery packs must not be disposed of with regular waste. Please return faulty or used battery packs to your Metabo dealer. Do not throw battery packs into water. Only for EU countries: Never dispose of power tools in your household waste! In accordance with European Guideline 2002/ 96/EC on used electronic and electric equipment and its implementation in national legal systems, used power tools must be collected separately and handed in for environmentally compatible recycling. Before disposal, discharge the battery pack in the power tool. Prevent the contacts from shortcircuiting (e. g. by protecting them with adhesive tape). ENGLISH en Vibration total value (vector sum of three directions) determined in accordance with EN 60745: KKaThyhh,p,,PSPiGca/Dl SA===-VUeUinfbfncercaecetrtiitrovataenininpetytemyr(icv(sveisbiibivroarenatditoviosnano)lu)uend(ploelvisehlsin: g) LKLpWpAAA, = Sound pressure level = Acoustic power level KWA= Uncertainty During operation the noise level can exceed 80 dB(A). Wear ear protectors! 14. Technical Specifications Explanation of details on page 3. Subject to changes serving technical progress. U = Voltage of battery pack tDmmaxa,x1 = maximum diameter of accessory = max. permitted thickness of clamping shank on accessory when using clamping nut (12) tmax,3 = max. permitted thickness of accessory M = Spindle thread l = Length of the grinding spindle n = No-load speed (maximum speed) m = Weight with smallest battery pack Measured values determined in conformity with EN 60745. Direct current The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards). Emission values These values make it possible to assess the emissions from the power tool and to compare different power tools. Depending on the operating conditions, the condition of the power tool or the accessories, the actual load may be higher or lower. For assessment purposes, please allow for breaks and periods when the load is lower. Based on the adjusted estimates, arrange protective measures for the user e.g. organisational measures. 15