Metabo PowerMaxx SB 12 Operating Instructions - Page 14
ventilation slots on the battery - test
View all Metabo PowerMaxx SB 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
en ENGLISH Children should be supervised to ensure that they do not play with the tool. Keep children away from the battery charger and the working area! Keep your battery charger out of reach of children! Pull out the mains plug immediately if the battery charger starts to smoke or flames emerge! Do not insert objects into the ventilation slots on the battery charger - there is a danger of electric shocks and short circuits! Do not use faulty battery packs. In areas with high metal dust exposure do not charge any battery packs with AIR COOLED chargers. 5. Overview 7. Use 7.1 Charging battery pack Push the battery pack completely to the stop on the sliding seat (2). The operating indicator (3) flashes. Note: To have the charge level displayed on Li-ion battery packs, first take the battery pack out of the charger and then press the button on the battery pack. 7.2 Conservation charge Once the charging process has finished, the battery charger automatically switches to conservation mode. The battery pack can remain in the battery charger and is therefore always ready for use. The operating display (3) lights up continuously. 8. Faults 8.1 Warning display (4) lights up continuously See page 2. The illustrations are regarded as exemplary for all devices. 1 Battery pack (not in scope of delivery) 2 Sliding seat 3 Operation display 4 Warning display 6. Initial Operation Battery pack is not charged. Excessive/insufficient temperature. When the temperature of the battery pack is between 0 °C and 50 °C, the charging process begins automatically. 8.2 Warning display (4) flashes Before commissioning, check that the rated mains voltage and mains frequency stated on the type plate match your power supply. Devices like these that generate direct current can influence simple earth leakage protection devices. Use a type F or better, with a release current of max. 30 mA. Before commissioning the charger, ensure that the air slots are free. Minimum distance to other objects is 5 cm! 6.1 Self-test Plug in. The warning display (4) and the operating indicator (3) light up one after the other for approx. 1 second and the installed fan runs for approx. 5 seconds. • Battery pack is defective. Remove the battery pack immediately from the charger. • The battery pack was not pushed correctly onto the sliding seat (2). See chapter 7.1. 9. Repairs Repairs to the charger must only be carried out by qualified electricians. If the mains connection cable of this device is damaged, it must be replaced by the manufacturer or the Customer Service department of the manufacturer or a similarly qualified person to prevent endangering personnel and property. If you have Metabo charges that require repairs, please contact your Metabo service centre. See www.metabo.com for addresses. 14