Metabo WEV 10-125 Operating Instructions 2 - Page 7

Operating Instructions ENGLISH en 1. Specified Use The angle grinders, when fitted with original Metabo accessories, are suitable for grinding, sanding, abrasive cutting-off operations and wire brushing metal, concrete, stone and similar materials without the use of water. WEV 15-125 HT, WEV 15-125 Quick Inox is additionally suited for light polishing work. We recommend using our angle polisher for demanding polishing work in continuous operation. Machines with the designation WEV are particularly suited for working with wire brushes due to thumbwheel for speed selection. The user bears sole responsibility for any damage caused by inappropriate use. Generally accepted accident prevention regulations and the enclosed safety information must be observed. 2. General Safety Instructions b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 2.3 Personal safety For your own protection and for the protection of your electrical tool, pay attention to all parts of the text that are marked with this symbol! WARNING - Reading the operating instructions will reduce the risk of injury. a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Pass on your electrical tool only together with these documents. General Power Tool Safety Warnings b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions WARNING - Read all safety warnings and will reduce personal injuries. instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking Save all warnings and instructions for future reference! The term "power tool" in the warnings refers to your mains-operated (corded) power tool up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. or battery-operated (cordless) power tool. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left 2.1 Work area safety attached to a rotating part of the power tool may a) Keep work area clean and well lit. Cluttered or result in personal injury. dark areas invite accidents. e) Do not overreach. Keep proper footing and b) Do not operate power tools in explosive atmospheres, such as in the presence of balance at all times. This enables better control of the power tool in unexpected situations. flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves c) Keep children and bystanders away while away from moving parts. Loose clothes, jewellery operating a power tool. Distractions can cause or long hair can be caught in moving parts. you to lose control. g) If devices are provided for the connection of 2.2 Electrical safety dust extraction and collection facilities, ensure these are connected and properly used. Use of a) Power tool plugs must match the outlet. dust collection can reduce dust-related hazards. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) 2.4 Power tool use and care power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. a) Do not force the power tool. Use the correct power tool for your application. The correct 7