Miele CM 6160 MilkPerfection Operating instructions/Installation instructions - Page 79
Unsatisfactory results, Contact the Technical Service department.
View all Miele CM 6160 MilkPerfection manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Frequently Asked Questions Unsatisfactory results Problem Possible cause and solution The coffee is not hot enough. The cup has not been pre-heated. The smaller the cup and the thicker its sides, the more important it is to pre-heat it. Pre-heat the cup, e.g. using the cup heater (depending on model). The brewing temperature is set too low. Set a higher brewing temperature. The filters in the brew unit are blocked. Remove the brew unit and clean it by hand. Degrease the brew unit. Heating-up is taking The coffee machine needs to be descaled. longer. The amount of Descale the coffee machine. water is no longer cor- rect and the coffee ma- chine is not performing properly. Coffee flows into the cup very slowly. The amount of coffee The brew unit is blocked. dispensed has changed. Degrease the brew unit (see "Cleaning and care - Degreasing the brew unit and cleaning the interior"). The consistency of the milk froth is unsatisfactory. The milk temperature is too high. Good milk froth can only be achieved when cold milk (below 50°F/10°C) is used. Check the temperature of the milk in the milk flask. The milk pipe is blocked. Clean the main dispenser and milk pipework with the brush. The coffee grinder makes a louder noise than usual. The coffee bean container has become empty during the grinding process. Fill the coffee bean container with fresh beans. There may be foreign objects such as plastic or stones in amongst the coffee beans. Switch the coffee machine off immediately. Contact the Technical Service department. 79