Miele CM 6360 MilkPerfection Operating instructions/Installation instructions - Page 71
Unusual performance of the coffee system, The On/Off button
View all Miele CM 6360 MilkPerfection manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Frequently Asked Questions Unusual performance of the coffee system Problem Possible cause and solution The display remains dark when the coffee machine is turned on using the On/Off button . The On/Off button was not held for long enough. Tap and hold the On/Off button for at least 3 seconds. The electrical plug is not properly plugged into the socket. Insert the electrical plug into the socket. The breaker has tripped because the coffee machine, voltage, or another appliance is defective. Unplug the coffee machine. Contact a qualified electrician or Miele Service. The lighting remains off after the coffee machine has been switched on. The lighting has been switched off. Switch the lighting on (see "Lighting" in the "Settings" chapter). The lighting is faulty. Contact Technical Service. The coffee machine turns off suddenly. The factory-set switch-off time (20 minutes) or the switch-off time you have programmed has been reached. If required, you can select a new switch-off time (see "Settings - Timer"). The plug is not properly plugged into the electrical socket. Insert the plug into the electrical socket. The sensor buttons do not respond. The machine can no longer be operated. There is an internal fault. Disconnect power by unplugging the power cord from the electrical outlet and or switching off the circuit breaker. The display is hard to see or not legible. The display brightness has been set too low. Change this setting (see "Settings"). 71