Miele CVA 6401 hvbr Product Manual - Page 66

Unsatisfactory result, Technical Service.

Get Miele CVA 6401 hvbr PDF manuals and user guides View all Miele CVA 6401 hvbr manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Frequently asked questions Unsatisfactory result Fault Possible cause and solution The consistency of The milk temperature is too high. Good milk froth can only the milk froth is be prepared with cold milk (under 55°F/13 °C). unsatisfactory. ^ Check the milk temperature in the milk container. The milk pipework or the air intake hose is clogged. ^ Follow the instructions in chapter "Cleaning clogged milk pipework". The grinding of the The coffee bean container has run empty during the coffee beans grinding process. sounds louder than usual. ^ Fill the coffee bean container with fresh beans. There might be pebbles mixed in with the coffee beans. ^ Turn the coffee machine off immediately. Contact Technical Service. Espresso or coffee The grind level is too coarse. flows into the cup ^ Set the grinder control to a finer setting (see "Adjusting the too quickly. grinder setting"). Espresso or coffee The grind level is too fine. flows into the cup ^ Set the grinder control to a coarser setting (see "Adjusting too slowly. the grinder setting"). The coffee or The cup has not been pre-heated. espresso is not hot enough. The brewing temperature is set too low. ^ Set a higher brew temperature (see "Brewing temperature"). The brew unit filters are blocked. ^ Remove the brew unit and clean it by hand (see "Brew unit" ). ^ Degrease the brew unit (see "Brew unit"). 66

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Unsatisfactory result
Fault
Possible cause and solution
The consistency of
the milk froth is
unsatisfactory.
The milk temperature is too high. Good milk froth can only
be prepared with cold milk (under 55°F/13 °C).
^
Check the milk temperature in the milk container.
The milk pipework or the air intake hose is clogged.
^
Follow the instructions in chapter "Cleaning clogged milk
pipework".
The grinding of the
coffee beans
sounds louder
than usual.
The coffee bean container has run empty during the
grinding process.
^
Fill the coffee bean container with fresh beans.
There might be pebbles mixed in with the coffee beans.
^
Turn the coffee machine off immediately. Contact
Technical Service.
Espresso or coffee
flows into the cup
too quickly.
The grind level is too coarse.
^
Set the grinder control to a finer setting (see "Adjusting the
grinder setting").
Espresso or coffee
flows into the cup
too slowly.
The grind level is too fine.
^
Set the grinder control to a coarser setting (see "Adjusting
the grinder setting").
The coffee or
espresso is not hot
enough.
The cup has not been pre-heated.
The brewing temperature is set too low.
^
Set a higher brew temperature (see "Brewing
temperature").
The brew unit filters are blocked.
^
Remove the brew unit and clean it by hand (see "Brew
unit" ).
^
Degrease the brew unit (see "Brew unit").
Frequently asked questions
66