Miele DA6690 D hvbr Product Manual - Page 48

Electrical connection WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR IN‐ JURY TO PERSONS, OBSERVE THE FOLLOWING: All electrical work should be per‐ formed by a qualified electrician in strict accordance with national regu‐ lations (for USA: ANSI-NFPA 70) and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. Ensure that power to the appliance is OFF while installation or repair work is performed. Verify that the voltage, load and cir‐ cuit rating information found on the data plate (located behind the baffle filters), match the household electri‐ cal supply before installing the hood. Use only with ventilation hood cordconnection kits that have been in‐ vestigated and found acceptable for use with this model hood. If there is any question concerning the electrical connection of this ap‐ pliance to your power supply, please consult a licensed electrician or call Miele's Technical Service Depart‐ ment. Grounding Instructions WARNING - Improper grounding can result in a risk of electric shock. This appliance must be grounded. In the event of an electrical short cir‐ cuit, grounding reduces the risk of electric shock by providing a path of least resistance.plug. If there is any doubt, have the elec‐ trical system of the house checked by a qualified electrician. To increase security before the ma‐ chine is installed, it is recommended to install a protective switch(30mA).  The hood must be hard wired ac‐ cordingly: Black/Red wire: connect to L1 (live) White wire: connect to N (neutral) Green wire: connect to GND (ground) WARNING: THIS APPLIANCE MUST BE GROUNDED 48