Miele DAR 1220 Set 4 Operating instructions
Miele DAR 1220 Set 4 Manual
 |
View all Miele DAR 1220 Set 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele DAR 1220 Set 4 manual content summary:
- Miele DAR 1220 Set 4 | Operating instructions - Page 1
Operating and Installation Instructions Range Wall / Insert Hood To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-US M.-Nr. 10 463 980 - Miele DAR 1220 Set 4 | Operating instructions - Page 2
Contents Caring for the environment 3 IMPORTANT SAFETY INSTRUCTIONS 4 Guide to the appliance 12 Description of functions Service and warranty 24 Location of the data plate 24 MieleCare ...24 Installation...25 Before installation 25 Removing the protective film 25 Installation Instructions - Miele DAR 1220 Set 4 | Operating instructions - Page 3
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of - Miele DAR 1220 Set 4 | Operating instructions - Page 4
To Exhaust Hazardous Or Explosive Materials And Vapors. This appliance is intended for residential use only. Use only as described in these operating instructions. This ventilation hood is not intended for outdoor use. It must only be used to extract and clean vapors produced during cooking - Miele DAR 1220 Set 4 | Operating instructions - Page 5
technician in accordance with national and local safety regulations and the provided installation instructions. Contact Miele's Technical Service Department for examination, repair or adjustment. Repairs and other work by unauthorized persons could be dangerous and may void the warranty. A damaged - Miele DAR 1220 Set 4 | Operating instructions - Page 6
IMPORTANT SAFETY INSTRUCTIONS Be certain your appliance is properly installed and grounded by in the enclosed "Installation diagram" and in the "Cleaning and care" section of this manual. Under no circumstances should any other parts of the housing be opened. Tampering with electrical connections - Miele DAR 1220 Set 4 | Operating instructions - Page 7
IMPORTANT SAFETY INSTRUCTIONS If the power cord is damaged, it must only be replaced by a qualified service technician. During installation, maintenance, and repair work, the ventilation hood must be disconnected from the electrical supply. It is only completely isolated from the electricity - Miele DAR 1220 Set 4 | Operating instructions - Page 8
IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A COOKTOP GREASE FIRE, OBSERVE THE FOLLOWING*: - a) SMOTHER FLAMES with a close fitting lid, - Miele DAR 1220 Set 4 | Operating instructions - Page 9
use the ventilation hood without the grease filters in place. There is a risk of fire if cleaning is not completed according to the instructions in this manual. Please note that the heat rising from the stovetop during cooking can cause the ventilation hood to become very hot. Do not touch the - Miele DAR 1220 Set 4 | Operating instructions - Page 10
IMPORTANT SAFETY INSTRUCTIONS Proper installation WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: - a) Installation work and electrical wiring must be - Miele DAR 1220 Set 4 | Operating instructions - Page 11
IMPORTANT SAFETY INSTRUCTIONS Be sure to observe the information contained in the "Installation made of non-flammable material. These can be obtained from your Miele dealer or from Miele Technical Service. Exhaust air should not be vented into a chimney or vent flue which is otherwise in use - Miele DAR 1220 Set 4 | Operating instructions - Page 12
Guide to the appliance 12 - Miele DAR 1220 Set 4 | Operating instructions - Page 13
Guide to the appliance a Duct cover Optional accessories DRDC in various heights. Cover will vary depending on model. b Recirculation vents Only in recirculation mode with conversion - Miele DAR 1220 Set 4 | Operating instructions - Page 14
Description of functions The following functions are available on Recirculating mode your ventilation hood, depending on the model: (with conversion kit DRUU) Vented mode with internal blower DRIB A blower mounted in the ventilation hood draws in the air. The air is cleaned by the baffle filter - Miele DAR 1220 Set 4 | Operating instructions - Page 15
Description of functions Appliance combinations The following appliance combinations are possible: Range Insert DAR 1120 (30") Range Insert DAR 1130 (36") Range Insert DAR 1150 (48") Range Wall Hood DAR 1220 (30") Range Wall Hood DAR 1230 (36") Range Wall Hood DAR 1250 (48") Range Wall Hood DAR - Miele DAR 1220 Set 4 | Operating instructions - Page 16
Operation Switch on the blower Power levels 1 to 3 are available for light to heavy cooking vapors and odors. If heavy cooking vapors and odors occur temporarily, e.g., during frying, select stage B as booster level. Use the blower switch to turn on the blower and select the appropriate power - Miele DAR 1220 Set 4 | Operating instructions - Page 17
Turning off the blower It is advisable to run the blower for a few minutes after cooking has finished to neutralize any lingering vapors and odors in the air. To turn the blower off, turn the blower switch to 0. Turning the overhead lighting on/off The overhead lighting can be turned on and off - Miele DAR 1220 Set 4 | Operating instructions - Page 18
Energy-saving tips This hood operates in a very efficient and energy-saving manner. The following will help you to save even more energy when using it: - Ensure that there is sufficient ventilation in the kitchen when cooking. If there is insufficient air flow during vented mode, the hood cannot - Miele DAR 1220 Set 4 | Operating instructions - Page 19
RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before cleaning or servicing the hood, disconnect it from the power supply, see "IMPORTANT SAFETY INSTRUCTIONS". Stainless steel housing General information The surfaces and control buttons are susceptible to scratching and - Miele DAR 1220 Set 4 | Operating instructions - Page 20
Cleaning and care Baffle filter The reusable stainless steel baffle grease filters in the appliance absorb the solid particles of kitchen vapors (grease, dust, etc.) and prevent soiling of the ventilation hood A dirty filter is a fire hazard! Removing the baffle filter During removal, the filter - Miele DAR 1220 Set 4 | Operating instructions - Page 21
for cleaning, also clean off any accessible oil or fat buildup from the housing. Doing so will prevent a fire hazard. Grease tray The lower support for the baffle filters serves as a grease tray; it collects dripped grease and can be removed for cleaning. Cleaning the baffle filters in a dishwasher - Miele DAR 1220 Set 4 | Operating instructions - Page 22
Cleaning and care Reinsert the baffle filters by pushing the filter upwards then pushing it in . 22 - Miele DAR 1220 Set 4 | Operating instructions - Page 23
Cleaning and care OdorFree Charcoal Filter The following ventilation hoods can be prepared for recirculation mode with the specified conversion kit: DAR 1220: conversion kit DRUU 30 DAR 1230: conversion kit DRUU 36 For recirculation mode, the baffle filters are fitted with a charcoal filter which - Miele DAR 1220 Set 4 | Operating instructions - Page 24
warranty For faults that you cannot resolve on your own, please contact your Miele dealer or Miele Technical Service. The telephone number for Miele is listed at the back of these instructions. When contacting Miele, please state the model and serial number of your ventilation hood. These can be - Miele DAR 1220 Set 4 | Operating instructions - Page 25
all of the information contained in this chapter and also in the "IMPORTANT SAFETY INSTRUCTIONS" section. Installation Instructions Please refer to the accompanying installation sheet for instructions on how to install the appliance. Removing the protective film The housing components are covered - Miele DAR 1220 Set 4 | Operating instructions - Page 26
Installation Installation parts 26 - Miele DAR 1220 Set 4 | Operating instructions - Page 27
screws and plugs are designed for use in solid walls only. Use different fasteners for other wall construction types. Make sure that the wall can support the load. 2 clamps for securing the DRDC and DRUU duct Covers (DAR 12xx only). 10 screws, M4 x 8 mm for fastening the cover caps and the - Miele DAR 1220 Set 4 | Operating instructions - Page 28
Installation Appliance dimensions Range Insert Hood DAR 1120, 1130, 1150 28 - Miele DAR 1220 Set 4 | Operating instructions - Page 29
Range Wall Hoods DAR 1220, 1230, 1250, 1260 Installation 29 - Miele DAR 1220 Set 4 | Operating instructions - Page 30
safety distances between a cooktop and the bottom of the hood. Please also observe the information contained in the "IMPORTANT SAFETY INSTRUCTIONS" section. Also observe the manufacturer's information regarding the distance from combustible materials, e.g. to wall units. Duct covers can also be - Miele DAR 1220 Set 4 | Operating instructions - Page 31
Installation Miele ventilation hood Internal/external Miele blower Miele electric/induction cooktops Miele barbeque and fryer (electric) Multi-burner Miele gas cooktop, ≤ 43,000 BTU/h (12.6 kW), none of the burners > 19,800 BTU/h (5.8 kW) Multi-burner Miele gas cooktop, > 43,000 BTU/h (12.6 kW) and - Miele DAR 1220 Set 4 | Operating instructions - Page 32
reduced. Please observe the conversion instructions for the jet kits as well as the operating and installation instruction for the Range/Rangetop. ventilation hood should be easy to reach and disassemble in case a service call is necessary. This should be taken into consideration when planning - Miele DAR 1220 Set 4 | Operating instructions - Page 33
available in the required locations, a plywood backing (min. ½" (13 mm) thick) spanning at least two studs must be installed. Failure to adequately support the weight as stated may result in the ventilation system falling off the wall, causing personal injury and property damage. If plywood backing - Miele DAR 1220 Set 4 | Operating instructions - Page 34
or in attics, crawl spaces or garages. To reduce the risk of fire, only use metal ductwork. Please read and follow the "IMPORTANT SAFETY INSTRUCTIONS" to reduce the risk of personal injury. Follow all local building codes when installing the hood. The exhaust air adapter of the ventilation hood - Miele DAR 1220 Set 4 | Operating instructions - Page 35
exhaust duct is to be routed through rooms, ceiling space etc., the temperatures in these different areas may differ greatly, which means that the problem of condensation will need to be addressed. The exhaust duct will need to be insulated. Installation of a non-return flap in the exhaust duct - Miele DAR 1220 Set 4 | Operating instructions - Page 36
concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele's Technical Service Department. Grounding Instructions WARNING - Improper grounding can result in a risk of electric shock. This appliance must be grounded. In the event - Miele DAR 1220 Set 4 | Operating instructions - Page 37
Technical data Total connected load DAR 1120, 1220 with blower DRIB XL or DREB XL DAR 1130, 1230 with blower DRIB XL or DREB XL DAR 1130, 1230 with blower DRIB XXL or DREB XXL DAR 1150, 1250, 1260 with blower DRIB XXL or DREB XXL Overhead lighting DAR 1120, 1220 DAR 1130, 1230 DAR 1150, 1250, 1260 - Miele DAR 1220 Set 4 | Operating instructions - Page 38
- Miele DAR 1220 Set 4 | Operating instructions - Page 39
U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 Fax: 609-419-4298 www.mieleusa.com Technical Service & Support Phone: 800-999-1360 Fax: 888-586-8056 [email protected] International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 - Miele DAR 1220 Set 4 | Operating instructions - Page 40
DAR 1120, DAR 1130, DAR 1150 DAR 1220, DAR 1230, DAR 1250, DAR 1260 en-US M.-Nr. 10 463 980 / 01
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
Operating and Installation Instructions
Range Wall / Insert Hood
To prevent accidents and damage to the appliance, you
must
read
these instructions before installing the appliance and using it for the first
time.
en-US
M.-Nr. 10 463 980