Miele DG 4086 BRWS Operating and Installation manual - Page 41

Frequently asked questions 41, Possible fault, Solution

Get Miele DG 4086 BRWS PDF manuals and user guides View all Miele DG 4086 BRWS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Frequently asked questions Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. The oven cannot be turned on. Possible fault Solution There is no power to the steam oven. Reset the circuit breaker if it has tripped. If this is not the case, disconnect the appliance from the power supply for 1 minute. Reconnect the power and turn the appliance on. If it still does not heat, contact Miele Technical Service. The fan can still be heard after the appliance has been turned off. Possible fault Solution The appliance has a fan which removes steam from the oven. The fan will continue to run for a while after the oven has been turned off. The steam generator is difficult to insert or remove. Possible fault Solution The connection valve at the steam connector needs to be lubricated. Lubricate the connection valve (not the electrical connection!) with a small amount of the supplied silicone grease. See "Cleaning and care - Connection valve". The heating phase takes an unusually long time. Possible fault Solution Check the bottom of the steam generator. If there are calcium deposits, check the water hardness level setting. Set the level to the water hardness of your area. See "Setting the water hardness". Descale the steam oven as described in "Descaling". If the water hardness is set correctly or if the problem persists, call Technical Service. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Repairs should only be carried out by an authorized technician in accordance
with local and national safety regulations. Unauthorized repairs could cause
injury or appliance damage.
The oven cannot be turned on.
Possible fault
Solution
There is no power to the steam
oven.
Reset the circuit breaker if it has tripped.
If this is not the case, disconnect the
appliance from the power supply for 1
minute.
Reconnect the power and turn the
appliance on. If it still does not heat, contact
Miele Technical Service.
The fan can still be heard after the appliance has been turned off.
Possible fault
Solution
The appliance has a fan which
removes steam from the oven.
The fan will continue to run for a while after
the oven has been turned off.
The steam generator is difficult to insert or remove.
Possible fault
Solution
The connection valve at the steam
connector needs to be lubricated.
Lubricate the connection valve (not the
electrical connection!) with a small amount
of the supplied silicone grease. See
"Cleaning and care - Connection valve".
The heating phase takes an unusually long time.
Possible fault
Solution
Check the bottom of the steam
generator. If there are calcium
deposits, check the water
hardness level setting.
Set the level to the water hardness of your
area. See "Setting the water hardness".
Descale the steam oven as described in
"Descaling".
If the water hardness is set correctly or if the
problem persists, call Technical Service.
Frequently asked questions
41