Miele DGC 6705 XL Specs - Page 3
Overall Unit Depth - Excluding Fascia Dimension
View all Miele DGC 6705 XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
ContourLine Plumbed Combi-Steam Oven DGC 6705 XL SPECIFICATIONS DGC 6705 XL - Item 23670552USA Overall Unit Width - Excluding Fascia Dimension Overall Height - Excluding Fascia Dimension Overall Unit Depth - Excluding Fascia Dimension Oven Door Clearance Depth with door open Overall Fascia Dimensions Built-In Minimum Cabinet Width Minimum Cabinet Depth Minimum Cabinet Opening Height Minimum Base Support Additional Cut-outs Required Plumbing 219/16" (548mm) 1711/16" (449mm) 215/8" (550mm) 13" (330mm) 3411/16" (898mm) 237/16" (595mm) W x 18" (455.5mm) H x 7/8" (22mm) D 221/16" - 223/8" (560 - 568mm) 217/8" (555mm) 1711/16" - 1713/16" (450 - 452mm) 60 lbs Venting and plumbing cut-out required 1911/16" x 19/16" (500 x 40 mm) Water Supply Requirements Connect to a cold water supply only. Must be connected to a shut-off valve. The water shut-off valve must be accessible after installation. The water pressure must be between 14.5 psi (1 bar) and may not exceed 87.02 psi (6 bar). If the pressure is higher than 87.02 psi (6 bar), a pressure reducing valve must be installed. The supplied hose has a length of 59" (1500mm). The hose must not be shortened. The entire hose length must not exceed 24'7" (7.5m). Drainage Requirements Plumbed Hose Connection Electrical Electrical Requirements Power Cord Cut out for power cord Electrical Rating Total Amps Shipping Shipping Weight Shipping Dimensions Support Call 20/20 Drain hose loop may be positioned at or above the flood level of the sink or drain board to which it is connect to provide the proper air gap. The top of end the drain hose must not be higher than 1911/16" (500mm) to where it connects to the drain trap. The drain hose must not be shortened. The entire hose length must not exceed 24'7" (7.5m). See installation manual for additional information. Supplied hose: flexible braided 4'11" (1.5m) with 3/8" O.D. fitting for connection to a shut off valve 240V 60Hz 20A Molded plug - NEMA 6-20, 240V power cord Minimum 3" square 2.7kW (240V) 11.25A on 240V 65 lbs 267/32" (666mm) W x 215/8"(549mm) H x 231/16" (535mm) L 800.843.7231 82020technologies.com FOREVER BETTER DGC 6705 XL Page 3 of 15