Miele ESW 4702 FB Operating and Installation manual - Page 41
Tighten the screws on the inside of the drawer front., Align the front.
View all Miele ESW 4702 FB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
^ Remove the cable tie from the panel. Installation ^ Screw the removed panel to the custom panel (see illustration). ^ Hook the panel into the bottom. Make sure the seal is seated correctly. ^ Replace and slightly tighten the screws on the inside of the drawer front. ^ Align the front. ^ Tighten the screws on the inside of the drawer front. ^ Replace the control panel, use caution with the power cord. ^ Replace and tighten the screws on to the left and right side of the drawer front. 41
^
Remove the cable tie from the panel.
^
Screw the removed panel to the custom panel (see
illustration).
^
Hook the panel into the bottom. Make sure the seal is
seated correctly.
^
Replace and slightly tighten the screws on the inside of the
drawer front.
^
Align the front.
^
Tighten the screws on the inside of the drawer front.
^
Replace the control panel, use caution with the power cord.
^
Replace and tighten the screws on to the left and right side
of the drawer front.
Installation
41