Miele KF 1911 SF Operating and Installation Manual - Page 43

Problems with the ice maker, Issue, Possible fault, Solution, The ice cube maker, will not switch on.

Get Miele KF 1911 SF PDF manuals and user guides View all Miele KF 1911 SF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Frequently asked questions Problems with the ice maker Issue Possible fault Solution The ice cube maker The appliance is not will not switch on. plugged in. Check that the appliance is connected to the power supply. The ice cube maker When the appliance is turned on for the very first time, it is not producing any can take up to 10 hours for the first ice cubes to drop ice cubes. out of the ice cube maker and collect in the container. The appliance is not turned Check that the appliance on. is switched on. The water supply line was not primed (purged of air) before the appliance was used for the first time. Contact Miele. Check if: - the ice cube maker is switched on. See "Ice Cube Maker" and/or "Plumbing" for more information. - the water supply line is open. - there are ice cubes stuck together and blocking the exit. - the ice cube container is in the right position. - the freezer compartment temperature is too high. - the water pressure is too low. The water pressure must be between 25 and 120 psi (1.72-8.25 bar). Check whether the correct water valve has been installed. Self-tapping valves and 3/16" (4.76 mm) saddle valves reduce the water pressure and can block the pipe. 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Problems with the ice maker
Issue
Possible fault
Solution
The ice cube maker
will not switch on.
The appliance is not
plugged in.
Check that the appliance
is connected to the power
supply.
The ice cube maker
is not producing any
ice cubes.
When the appliance is turned on for the very first time, it
can take up to 10 hours for the first ice cubes to drop
out of the ice cube maker and collect in the container.
The appliance is not turned
on.
Check that the appliance
is switched on.
The water supply line was
not primed (purged of air)
before the appliance was
used for the first time.
Contact Miele.
Check if:
– the ice cube maker is
switched on.
– the water supply line is
open.
– there are ice cubes stuck
together and blocking the
exit.
– the ice cube container is
in the right position.
– the freezer compartment
temperature is too high.
– the water pressure is too
low. The water pressure
must be between 25 and
120 psi (1.72-8.25 bar).
See "Ice Cube Maker"
and/or "Plumbing" for more
information.
Check whether the correct
water valve has been
installed.
Self-tapping valves and
3
/
16
" (4.76 mm) saddle
valves reduce the water
pressure and can block
the pipe.
Frequently asked questions
43