Miele KF 2981 SF Operating and Installation instructions - Page 19
Side-by-side, ... with partition wall, at least, 8 16 mm, narrower than, 5/16 160 mm, thicker than
View all Miele KF 2981 SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installation information Side-by-side This appliance can be installed side-byside with another refrigeration appliance. The following overview will show you which side-by-side options you have with your appliance: A side-by-side merging kit and a top frame (KTF) are required for this. Both are available from your Miele dealer or Miele Technical Service. Instructions for installing appliances side-by-side can be found in the sideby-side merging kit instruction manual. The appliances are secured individually in their niche using the supplied installation material. If the partition wall a is narrower than 6 5/16" (160 mm), you will need the side panel heater from the side-by-side installation kit to prevent condensation from forming and any resulting damage. If the partition wall a is thicker than 6 5/16" (160 mm), you do not need the side-by-side installation kit, nor the side panel heater. . . . without partition wall ... with partition wall The wall a between the side-by-side appliances must be at least 5/8" (16 mm) thick. If the appliances are to be installed next to each other without a partition wall between them, they will need to be joined together with the side-by-side installation kit. In addition, you must install the side panel heater to prevent condensation from forming and any resulting damage. 19