Miele KM 6360 Product Manual - Page 50
One or more residual, turned off.
View all Miele KM 6360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Frequently asked questions Problem Auto Heat-up is turned on, but the food does not start cooking. Possible cause and solution Large amounts of food are being heated. Start cooking at the highest power level, then re‐ duce the power level manually. The pan is not conducting heat properly. Use a different pan that is able to better conduct heat on an induction cooktop. A noise can be heard after the appliance is turned off. The fan will continue running until the appliance has cooled down. It will then switch itself off automatical‐ ly. One or more residual heat indicators is flash‐ ing. There was a power failure during operation or when residual heat was present. You called the programming function while residual heat was still present. The sensor buttons are The sensitivity level of the sensor buttons has over-sensitive or do not changed. react at all. Ensure that the cooktop is not in direct sunlight or strong artificial light and that the area around the cooktop is not too dark. Make sure that there is nothing covering the sen‐ sor buttons or the cooktop. Take any pans off the cooktop and wipe away any food deposits. Interrupt the power supply to the cooktop for ap‐ prox. 1 minute. If the problem persists after power is restored, please contact Miele Service. 50