Miele PT 7136 Operating and Installation manual - Page 28

Other faults, Possible fault, Solution, The program, runs too long or, stops., The laundry is - vented dryer

Get Miele PT 7136 PDF manuals and user guides View all Miele PT 7136 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Frequently asked questions Other faults What if ... The program runs too long or stops. The laundry is not dry enough. Possible fault Solution In some cases "Clean out airways" is displayed. See "Settings - Supervisor level - Clean the airways". Open and close the dryer door. The air supply is insufficient. Open a window or door to increase the air flow. The lint filter is clogged with lint. Remove the lint. The exhaust hose or the - Check the exhaust parts connection is clogged with regularly (e.g. wall vent duct, lint. louvered wall vent, bends, etc.) for air permeability. - Remove the lint. The laundry was not spun Spin laundry thoroughly before sufficiently in the washer. drying. The dryer has over-loaded. Regard the maximum load size per program. Metallic zippers prevent a correct measurement of the laundry's residual moisture. - Open the zippers of the laundry before drying. If the problem persists, dry items with long zippers using the "Warm air" program. The load contained too - Continue drying using the many dissimilar items (size "Warm air" program. and fabrics.) - See the "Program Guide" for suitable programs. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Other faults
What if ...
Possible fault
Solution
The program
runs too long or
stops.
In some cases "Clean out airways" is displayed. See
"Settings - Supervisor level - Clean the airways". Open and
close the dryer door.
The air supply is
insufficient.
Open a window or door to
increase the air flow.
The lint filter is clogged
with lint.
Remove the lint.
The exhaust hose or the
connection is clogged with
lint.
– Check the exhaust parts
regularly (e.g. wall vent duct,
louvered wall vent, bends,
etc.) for air permeability.
– Remove the lint.
The laundry was not spun
sufficiently in the washer.
Spin laundry thoroughly before
drying.
The dryer has over-loaded. Regard the maximum load size
per program.
Metallic zippers prevent a
correct measurement of
the laundry’s residual
moisture.
– Open the zippers of the
laundry before drying.
If the problem persists, dry
items with long zippers using
the "Warm air" program.
The laundry is
not dry enough.
The load contained too
many dissimilar items (size
and fabrics.)
– Continue drying using the
"Warm air" program.
– See the "Program Guide" for
suitable programs.
Frequently asked questions
28