Miele S 5281 Libra Operating manual Car Clean Set - Page 12
Accessories, Connecting the suction hose
View all Miele S 5281 Libra manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
en CarClean Set Plus CarClean Set Vario (see the illustrations on pages 2, 4 and 5) (see the illustrations on pages 3 and 5) The Miele CarClean Set Plus has been designed for use with Miele series S 227 to S 858 and S 4000 and S 5000 cylinder vacuum cleaners. If your vacuum cleaner is fitted with hose connector A, you can use the CarClean Set hose as it is. If your vacuum cleaner is fitted with another type of hose connector, you will need to use one of the following adapters to attach the CarClean Set Plus suction hose to the cleaner: - Adapter B for vacuum cleaners in the S 4000 and S 5000 series. - Adapter C for all other vacuum cleaners. The Miele CarClean Set Vario has been designed for use with Miele and non-Miele cylinder vacuum cleaners. This set does not include a 3 metre extension suction hose. The adapter f supplied with this set is required for connecting the accessories to non-Miele cylinder vacuum cleaners. Accessories a Micro-hose with combination nozzle (crevice nozzle and dusting brush) b Hand-held Turbobrush c Crevice nozzle (300 mm) d + e Extension suction hose (3 m) with hose clip (supplied only with CarClean Set Plus) f Adapter (supplied only with CarClean Set Vario) ^ Attach adapter B or C to the CarClean Set Plus suction hose. It must click into place. Take care to position it correctly (see illustration above). 12 Connecting the suction hose d ^ Fit the locking ring or the adapter into the suction socket on your vacuum cleaner (illustrations g to i). To remove the suction hose from the vacuum cleaner, ^ press the release button (illustrations j to l) and pull the locking ring or adapter out of the socket Important note for Miele vacuum cleaner models S 356i / S 456i ^ Insert the bridging piece supplied with your S 356i / S 456i into the slot on the suction hose adapter, then fit the adapter into the suction socket as shown (illustration m).