Miele S 5381 Leo Operating manual STB 205 - Page 10

en - Use Using the Turbobrush Using the Turbobrush The Turbobrush is particularly suitable for vacuuming cut pile carpeting and is operated by the suction power of the vacuum cleaner. It has a rotating roller brush which is very effective at picking up thread, hairs and fluff and four rollers maintain the brush 1.5 mm away from the floor. ^ To achieve the best effect, pass the Turbobrush slowly backwards and forwards over the carpet or floor covering. For carpets with fringes always draw the Turbobrush from the carpet across the fringe towards the rest of the floor. The normal foorhead or one of the Miele floorbrushes should be used for cleaning hard floors, such as tiled or parquet floors. It is also important to observe the flooring manufacturer's cleaning and care instructions. The following should not be vacuumed using the Turbobrush: - Floor surfaces with a variable or uneven profile. The brush might come into contact with the floor and cause damage. - Carpets such as saxony with very long-pile, berber and sheepskin rugs, and valuable hand-knotted carpets, e.g. Persian and similar. There is a danger of the threads being pulled out. If in doubt, contact the carpet manufacturer/retailer. 10